Z855 – Z875 Z895 – Z8125 SERIES

Level Probe
Module
SLD Series
APPLICATIONS
• Accessory for electric panels.
SPECIFICATIONS
• Electronic module for use of probes
as protection against dry running.
• Supply voltage: 1 x 24 V ±10 % for
model SLD/24.
Frequency: 50/60 Hz.
Absorbed power: 2 VA.
• Voltage to probes: 15 V AC at 0.5
mA max.
• Switch contact: 24 V AC at 5 A max
(250 W max).
• Designed for installation on Lowara
electric panels featuring DIN bar.
• Electrodes suitable for water at a
maximum temperature of 40°C.
CONSTRUCTION
CHARACTERISTICS
• Module made of plastic material
with DIN bar attachment
• Cables with quick plug-in
connectors.
• Set of three electrodes included in
the supply.
• Electrodes with nylon 6 body,
stainless steel sensitive element,
brass washer and nitrile rubber seal.
OPTIONAL
ACCESSORIES
• Drop cable with circular cross
section For connection of the
electrodes to the panel we
recommend the following cross
sections:
LENGHT
ACCESSORIES
CABLE CROSS SECTION
mt mm 2
0 50 0,50
50 100 0,75
100 200 1,00
200 400 2,50
400 oltre 4,00
Three-pole cables can be used for
short lengths.
Otherwise we recommend the use of
single-pole cables placed at suitable
distances
from each other to prevent the
capacitive effect of the cable from
interfering with the proper operation
of the electronic module.
TYPE VOLTAGE CONTACT APPLICATIONS DIMENSIONS
CAPACITYI
A x B x C
V
mm
Kit SLD/24 1 x 24 24 V a 5 A
50/60 Hz
QMCS-QTD
Q3D-Q3Y 90 x 35 x 60
Q3A-Q3I
Q3SF
53