Intumescent Fire Seals - RIBA Product Selector

Tools
DBB Mortice Jigs and Fittings
A DBB1 mortice jig
• Suitable for all lock and latch cases
• Self-centring mortice jig with precision cutters
complete with plastic carry case
• Comprises:
Mortice jig
Standard shaft: 220 mm length
Depth stop
Ø 19 mm wood cutter
Ø 22.2 mm wood cutter
Ø 25.4 mm wood cutter
Instruction booklet
1x Allen key
Cat. No. 001.67.700
Order qty: 1 pc
B DBB2 offset mortice jig
• Suitable for all lock and latch cases
• Offset mortice jig with precision cutters
complete with plastic carry case
• Comprises:
Mortice jig
Standard shaft: 220 mm length
Depth stop
Ø 19 mm wood cutter
Ø 22.2 mm wood cutter
Ø 25.4 mm wood cutter
Instruction booklet
1x Allen key
Cat. No. 001.67.771
Order qty: 1 pc
F Housing kit
• Aluminium
Type
Cat. No.
Standard, door thickness
up to 55 mm 001.67.706
Special, door thickness
over 55 mm 001.67.701
Offset 001.67.798
Long drill 001.67.792
Small bore 001.67.791
Order qty: 1 pc
G Long drill, Ø 10 mm
• Order housing kit separately
• To drill through full width of door for electric
cables etc.
Length
Cat. No.
950 mm 001.67.760
1250 mm 001.67.761
Order qty: 1 pc
4
TCH-AI 2008, HUK. Dimensional data not binding. We reserve the right to alter specifications without notice.
DBB mortice jigs
• Technical data: (for items A, B and C)
• Use with a drill with 2,000-3,000 rpm with
hammer action off and a 12.7 mm chuck
• Max. mortice depths and shaft lengths:
Items A and B: Max. mortice depth 90 mm,
shaft length 220 mm
Item C: Max. mortice depth 180 mm, shaft
length 298 mm
For optional shafts see item H
• Max. door thickness (standard housing): 55 mm
• Max. door thickness (special housing): 80 mm
• Max. vertical movement (average 45 mm thickdoor):
240 mm
• Door and frame with offset morticer max. 95 mm
• Features: (for items A, B and C)
Quick change cutter feature
Cuts lock forend as well as lock body
Self-centring action
Achieves an accurate depth of cut to hardwood
and softwood doors
• Aluminium housing and clamps, steel jig rods
C DBB/R100 mortice jig
• For use when installing Perko
Powermatic concealed hydraulic door
closer, shown in Section 6 page 67, item A
• Self-centring mortice jig with precision cutters
complete with plastic carry case
• Comprises:
Mortice jig
Long shaft: 298 mm length
Depth stop
Ø 25.4 mm wood cutter
Ø 27 mm wood cutter
Ø 28.6 mm wood cutter
Instruction booklet
Cat. No. 001.67.770
Order qty: 1 pc
D Wood cutter
• Hardened steel
Cutting Ø Screw thread Push-fit
Small bore version version
Ø 13.2 mm 001.67.840 -
Ø 14.6 mm 001.67.841 -
Standard bore
Ø 16.2 mm 001.67.842 001.67.702
Ø 17.5 mm 001.67.843 001.67.718
Ø 19 mm 001.67.844 001.67.703
Ø 20 mm 001.67.845 001.67.720
Ø 20.6 mm 001.67.846 -
Ø 22.2 mm 001.67.847 001.67.704
Ø 23.0 mm 001.67.848 -
Ø 23.8 mm 001.67.849 001.67.724
Ø 25.4 mm 001.67.850 001.67.705
Ø 27 mm 001.67.851 001.67.727
Ø 28.6 mm 001.67.852 001.67.729
Ø 31.8 mm 001.67.853 001.67.732
Order qty: 1 pc
E CD-ROM DBB morticer
• Demonstrational CD-ROM
Cat. No. 001.67.799
Order qty: 1 pc
H Shaft
• For replacement shaft for standard and offset
jigs, items A and B, use 220 mm length
• For replacement shaft for Perko, item C, use
298 mm length
• Steel
Length Small bore Standard bore
220 mm 001.67.740 001.67.707
298 mm - 001.67.708
Depth stop - 001.67.747
Order qty: 1 pc
Depth stop
I Bolt depth gauge
• Takes guesswork out of fitting the strike plate to
the door frame
• Simply fit the lock, close the door and throw the
bolt as far as it will go. Set the gauge on the
bolt, open the door and accurately mark the
position of the bolt
• 0.5 mm blade thickness
Cat. No. 001.67.750
Order qty: 1 pc
J 6 x grub screws and Allen key
• Steel
Cat. No. 001.67.709
Order qty: 1 pc
Page
Sales and Technical Support Tel: 01788 548855 (all regions) • Tel: 0208 418 2435 (London region) Section 4 227