22.11.2013 Views

Intumescent Fire Seals - RIBA Product Selector

Intumescent Fire Seals - RIBA Product Selector

Intumescent Fire Seals - RIBA Product Selector

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Gira Radio Bus System<br />

Receivers<br />

Radio DRA components can be used to upgrade existing<br />

conventional distributor installations to radio<br />

Note: A combination of radio presence detectors and radio<br />

observers (shown on page 205) cannot be assigned<br />

4<br />

A Radio reception module DRA<br />

• Receives radio telegrams and forwards them to the various radio DRA<br />

actuators via separate data cable<br />

• Integrated antenna for receiving radio telegrams - in unfavourable conditions<br />

(e.g. metal cabinet) an external antenna, item B, can be connected<br />

• Ø 0.8 mm shielded cable must be used - not included<br />

• Data cable length to radio DRA actuators may not exceed 3 m<br />

• Up to 30 radio DRA actuators can be networked<br />

• Technical specification:<br />

Dimensions: DRA device, 2 depth modules<br />

Power supply: 230V AC, 50/60Hz<br />

Data cable: J-Y (St)Y 2 x 2 x 0.8<br />

YCM 2 x 2 x 0.8<br />

Length of data cable: Max. 3 m<br />

Reception frequency: 433.42 MHz<br />

Protection type: IP 20<br />

Cat. No. 985.54.570<br />

Order qty: 1 pc<br />

D Radio universal dimming actuator, 1 gang, DRA<br />

• Receives radio telegrams for switching and dimming various electrical loads<br />

from radio reception module, item A, via a separate data cable<br />

• Maximum 30 radio channels. Can be integrated in up to 5 light scenes<br />

• Automatic assignment of an existing All ON or All OFF button<br />

• Short-circuit and excess-temperature protection<br />

• Desired brightness value can be saved (memory function)<br />

• Capable of switching on for delay period of approx. 1 min<br />

• Light control with radio presence detector<br />

• Power expansion via power boosts<br />

• Technical specification:<br />

Dimensions: DRA device, 4 depth modules<br />

Power supply: 230V AC, 50Hz<br />

Connected load: 50 to 400 W/VA<br />

Contact rating: Various - information on request<br />

Protection type: IP 20<br />

Cat. No. 985.54.611<br />

Order qty: 1 pc<br />

For full specification on all these products, please<br />

contact our sales and technical support department<br />

or visit www.gira.com<br />

B Radio additional antenna DRA<br />

• External antenna for radio reception module DRA, item A<br />

• Required where unfavourable installation conditions exist (e.g. metal<br />

distribution cabinet)<br />

Cat. No. 985.54.580<br />

Order qty: 1 pc<br />

1-gang<br />

4-gang<br />

C Radio switching actuator, 1- or 4-gang, DRA<br />

• Receives radio telegrams for switching electrical loads (230V AC/10A) from<br />

radio reception module, item A, via a separate data cable<br />

• Can also be operated via an auxiliary unit (push button)<br />

• Maximum 30 radio channels. Can be integrated in up to 5 light scenes<br />

• Automatic assignment of an existing All ON or All OFF button<br />

• Capable of switching on for delay period of approx. 1 min<br />

• Light control with radio presence detector in 2 point mode<br />

• Technical specification:<br />

Dimensions: DRA device, 1-gang/2-gang: 2/4 depth modules<br />

Power supply: 230V AC, 50Hz<br />

Switch contact: Relay (10A)<br />

Contact rating: Various - information on request<br />

Protection type: IP 20<br />

Type 1-gang 4-gang<br />

Cat. No. 985.54.601 985.54.604<br />

Order qty: 1 pc<br />

E Radio control unit, 1-10V, I gang, DRA<br />

• Receives radio telegrams from radio reception module, item A, via a<br />

separate data cable, for switching and dimming fluorescent lamps via<br />

electronic ballasts or electronic transformers with standard 1-10V interface<br />

• Installation on DIN cap rail<br />

• Maximum 30 radio channels. Can be integrated into up to 5 light scenes<br />

• Desired brightness value can be saved (memory function)<br />

• Automatic assignment of an existing All ON or All OFF button<br />

• Capable of switching on for delay period of approx. 1 min<br />

• Light control with radio presence detector<br />

• Technical specification:<br />

Dimensions: DRA device, 4 depth modules<br />

Power supply: 230V AC, 50Hz<br />

Control voltage: 1 to 10V<br />

Control current: max. 15mA<br />

Protection type: IP 20<br />

Cat. No. 985.54.621<br />

Order qty: 1 pc<br />

Deep wall box, for flush mounting of universal and multi-function<br />

transmitters shown on page 204, of mini radio actuators shown on page 206<br />

and mini radio universal dimmer shown on page 207<br />

For Klemmfix and signal cover, for use with this wall box refer to page 193<br />

For futher information on System 55 installation and for details of Kaiser<br />

installation tools, refer to Section 8<br />

Ø 60<br />

F Wall box, for flush mounting<br />

• Mounting screw distances 60 mm<br />

• 63 mm depth<br />

• Dims according to DIN standard<br />

• Snap-lock coupling, to connect to other boxes - for standard combination<br />

distances of 71 mm<br />

• With 2x 15 mm screws<br />

• Black plastic<br />

Cat. No. 917.91.002<br />

Order qty: 1 pc<br />

63<br />

TCH-AI 2008, HUK. Dimensional data not binding. We reserve the right to alter specifications without notice.<br />

Page<br />

Section 4 208<br />

Prices • Stock Availability • <strong>Product</strong> Information • Ordering www.hafele.co.uk

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!