Intumescent Fire Seals - RIBA Product Selector
Intumescent Fire Seals - RIBA Product Selector
Intumescent Fire Seals - RIBA Product Selector
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Retractable Door <strong>Seals</strong><br />
Timber Doors<br />
A FT section retractable aluminium seal<br />
• Suitable for timber, aluminium and PVC doors<br />
• Lift height 20 mm<br />
• Fixed at door bottom, fixings not included<br />
• Unilateral release with parallel drop-down<br />
• Automatic compensation to inclined floors<br />
• One groove width for any requirement<br />
• Acoustic rating of 48dB at 7 mm floor to door<br />
clearance, 42dB at 20 mm clearance<br />
• Can be shortened to the next stock length (see<br />
table)<br />
• High grade silicone lip<br />
• Simple lift height adjustment<br />
• 5 year warranty<br />
• End cap included<br />
• Aluminium, clear anodised, stainless steel stop<br />
plate<br />
Overall length Minimum cut length Cat. No.<br />
750 mm 650 mm 950.05.221<br />
850 mm 750 mm 950.05.222<br />
950 mm 850 mm 950.05.223<br />
1050 mm 950 mm 950.05.224<br />
Order qty: 1 pc<br />
30<br />
25<br />
13<br />
Photo shows Seal A with surface mounted cover item C<br />
shown on page 136<br />
Note: Surface cover is not included and must be<br />
ordered separately<br />
Lift height<br />
up to 20 mm<br />
4<br />
Also available in lengths down to 400 mm and up to 2000 mm, subject to quantity<br />
For double doors it is possible to order seals with flush bolts (for top and bottom) with the bottom bolt<br />
passing through the seal, see diagram on page 137<br />
This seal can also be ordered for sliding folding doors, with and/or without flush bolts as shown 137<br />
This seal can be mounted using surface mounted cover, see page 136 item C<br />
TCH-AI 2008, HUK. Dimensional data not binding. We reserve the right to alter specifications without notice.<br />
B HS section retactable aluminium seal<br />
• Suitable for timber, aluminium and PVC doors<br />
• Lift height 20 mm<br />
• Fixed on side with stainless steel brackets and<br />
screws<br />
• Unilateral release with parallel drop-down<br />
• Automatic compensation to inclined floors<br />
• One groove width for any requirement<br />
• Acoustic rating of 48dB at 7 mm floor to door<br />
clearance 44dB at 18 mm clearance<br />
• Can be shortened to the next stock length (see<br />
table)<br />
• High grade silicone lip, protected by deeper<br />
rebate<br />
• Simple lift height adjustment<br />
• End cap included<br />
• Aluminium, clear anodised, stainless steel stop<br />
plate<br />
Overall length Minimum cut length Cat. No.<br />
710 mm 585 mm 950.10.001<br />
835 mm 710 mm 950.10.002<br />
960 mm 835 mm 950.10.003<br />
1085 mm 960 mm 950.10.004<br />
Order qty: 1 pc<br />
Lip protection<br />
30<br />
13<br />
Lift height<br />
up to 20 mm<br />
Also available in lengths down to 400 mm and up to 2000 mm, subject to quantity<br />
28<br />
30<br />
Shorten up<br />
to 10 mm<br />
For double doors it is possible to order seals with flush bolts (for top and bottom) with the bottom bolt<br />
passing through the seal, see diagram on page 137<br />
This seal can also be ordered for sliding folding doors, with and/or without flush bolts as shown on<br />
page 137<br />
Page<br />
Sales and Technical Support Tel: 01788 548855 (all regions) • Tel: 0208 418 2435 (London region) Section 4 135