22.11.2013 Views

Intumescent Fire Seals - RIBA Product Selector

Intumescent Fire Seals - RIBA Product Selector

Intumescent Fire Seals - RIBA Product Selector

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Gira Radio Bus System<br />

Transmitters<br />

Event, Esprit and<br />

E2 cover frames are<br />

shown on page 192<br />

For full specification on all<br />

these products, please contact<br />

our sales and technical support<br />

department or visit<br />

www.gira.com<br />

1 gang wall transmitter<br />

installed in Esprit black<br />

glass frame<br />

1 gang wall transmitter<br />

installed in Event<br />

aluminium colour frame<br />

4<br />

1 gang 3 gang<br />

A Radio wall transmitter, flat design<br />

• Enables wireless but permanently installed remote control of the radio<br />

receiver<br />

• Flat design: Can be attached to walls with screws or glued onto smooth or<br />

transparent surfaces (i.e. glass partitions) with base plate, item B<br />

• For use with E2, Event and Esprit cover frames shown on page 192, but<br />

not in metallic frames i.e. aluminium Esprit frame<br />

• Can also be used with Standard 55 frames - information on request<br />

• Features:<br />

3 gang microswitch is used to specify the function of the wall transmitter<br />

and sends the following radio telegrams depending on the setting:<br />

1 gang specification:<br />

1 radio channel or<br />

1 light scene and All OFF<br />

3 gang specification:<br />

max. 3 radio channels or<br />

5 light scenes and All OFF<br />

• Technical specification:<br />

Power supply: 3V DC<br />

Battery: 1 x lithium button cell (CR2032) - included<br />

Transmission frequency: 433.42 MHz<br />

Range: Typically 30 m (free field)<br />

Temperature range: 0ºC to +55ºC<br />

• Inscription sheets are available (51 x 51 mm) - information on request<br />

Finish Type 1 gang 3 gang<br />

Transparent white Cat. No. 985.54.201 985.54.203<br />

Order qty: 1 pc<br />

B Base plate set<br />

• Self adhesive adaptor plates for attaching to back of flat design radio wall<br />

transmitter C to give clean flat surface at rear<br />

• Flat design wall transmitter C can then be attached to:<br />

Smooth or transparent surfaces such as glass partitions<br />

E2, Event and Esprit (not metallic) cover frames shown on page 192<br />

• 1 set comprises 4 plates<br />

Cat. No. 985.54.310<br />

Order qty: 1 pc<br />

C Radio universal transmitter 2<br />

• Allows expansion of an existing installation with wireless transmission of<br />

switching commands<br />

• While controlling both inputs (E1, E2) with mains voltage (230VAC), radio<br />

telegrams are sent<br />

• For mounting behind flush-mounted insert in 63 mm deep flush-mounted<br />

wall box, shown on page 208 - order separately<br />

• Operating modes:<br />

2-channel dimming: Connection of conventional push buttons (NO contacts).<br />

Pressing the push button leads to switching (toggling) of the<br />

telegram type in the transmitter.<br />

2-channel switching: Connection of conventional switches (NO contacts).<br />

Sends switch-on telegrams for closing and switch-off telegrams for opening.<br />

When connecting conventional push buttons (NO contacts), a special<br />

function is executed so that when the push button is closed, the transmitter<br />

sends switch-on telegrams; it sends switch-off telegrams when open.<br />

1-channel dimming: Connection of conventional push buttons (NO contacts)<br />

for sending dimming telegrams<br />

1-channel blind: Connection of a blind switch or a blind controller insert for<br />

controlling a blind<br />

• Technical specification:<br />

Dimensions (Ø x height): Ø52 x 23 mm<br />

Power supply: 230V AC, 50 Hz, N conductor required<br />

Transmission frequency: 433.42 MHz<br />

Range: Approx. 100 m (free field)<br />

Temperature range: -20°C to +55°C<br />

Cat. No. 985.54.300<br />

Order qty: 1 pc<br />

D Radio multi-function transmitter, 4 gang<br />

• Battery operated radio input used for the connection of zero-voltage<br />

contacts<br />

• Enables cordless transmission of switching and touch commands without a<br />

230V connection<br />

• For mounting behind flush-mounted insert in 63 mm deep flush-mounted<br />

wall box, shown on page 208 - order separately<br />

• Operating modes:<br />

One- to four-channel switching with conventional switches for the control of<br />

switching and dimming or blind actuators<br />

One- to four-channel button actuation with conventional buttons for the<br />

control of switching actuators<br />

Two-channel dimming with serial buttons<br />

Up to 4 channels can be switched or dimmed with a single touch (via toggle<br />

switch in transmitter)<br />

All ON, All OFF or light scenes<br />

• Technical specification:<br />

Dimensions (width x height x depth): 45 x 38 x 10 mm<br />

Inputs: 4<br />

Power supply: 3V DC<br />

Battery: 1x lithium button cell (CR 2032) - included<br />

Input line: 8-wire cable set, approx. 300 mm long, extendible up to 5 m<br />

Transmission frequency: 433.42 MHz<br />

Range: Typically 100 m (free field)<br />

Temperature range: -20ºC to +55ºC<br />

Protection type: IP20<br />

Cat. No. 985.54.324<br />

Order qty: 1 pc<br />

TCH-AI 2008, HUK. Dimensional data not binding. We reserve the right to alter specifications without notice.<br />

Page<br />

Section 4 204<br />

Prices • Stock Availability • <strong>Product</strong> Information • Ordering www.hafele.co.uk

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!