netLINK NL 50-MPI

More documents

Recommendations

Info

Description and Requirements 18/65 3.4 Compatibility of the netLINK NL 50-MPI to the NL-MPI The netLINK NL 50-MPI is compatible to the netLINK NL-MPI with respect to the following details: • The communication functionality for user data exchange is compatible. • The configurations of both device are compatible. With respect to the diagnostic functions there is only a partial compatibility. netLINK NL 50-MPI Ethernet | Installation, Operation and Hardware Description DOC080604UM05EN | Revision 5 | English | 2011-09 | Released | Public © Hilscher, 2008-2011
Getting Started 19/65 4 Getting Started 4.1 Mount 4.2 Power Supply The NL 50-MPI is slipped and screwed on a S7 MPI / PROFIBUS interface or another compatible device with the MPI / PROFIBUS interface of the NL 50-MPI. The power supply of the NL 50-MPI can be performed by directly plugging the device onto a PLC. Alternatively to the direct power supply method by the PLC there is the possibility for external power supply with a voltage of 24 V using the Mini-Combicon connector. CAUTION! Device Destruction! • The reference potential of the power supply is galvanically connected with the reference potential of the PROFIBUS for hardware revision 2 and 3 of the device. From this it follows that the power supply must be potential free! Device Destruction! • The reference potential of the power supply is galvanically connected with the reference potential of the PROFIBUS for hardware revision 2 and 3 of the device. From this it follows that the power supply must be potential free! With hardware revision 4 of the NL 50-MPI device the power supply of the device and the PROFIBUS interface is connected via optocoupler and hence galvanically separated. 4.3 Ethernet Connection The Ethernet connector of the NL 50-MPI is connected to a switch, hub or Ethernet end device by an Ethernet cable. The NL 50-MPI operates its Ethernet interface in the Auto-crossover mode. Thus for the connection with Ethernet devices both crossover cables and patch cables are applicable. netLINK NL 50-MPI Ethernet | Installation, Operation and Hardware Description DOC080604UM05EN | Revision 5 | English | 2011-09 | Released | Public © Hilscher, 2008-2011
Page 1 and 2: User Manual netLINK NL 50-MPI Insta
Page 3 and 4: Introduction 3/65 4.3 Ethernet Conn
Page 5 and 6: Introduction 5/65 1 Introduction 1.
Page 7 and 8: Introduction 7/65 1.2 Contents of t
Page 9 and 10: Introduction 9/65 1.3 Legal Notes 1
Page 11 and 12: Introduction 11/65 1.3.5 Export Reg
Page 13 and 14: Safety 13/65 2.4 Labeling of Safety
Page 15 and 16: Safety 15/65 2.6 Safety Instruction
Page 17: Description and Requirements 17/65
Page 21 and 22: Installing Software 21/65 5.2 Insta
Page 23 and 24: Configuration 23/65 6 Configuration
Page 25 and 26: Configuration 25/65 5. Connecting t
Page 27 and 28: Configuration 27/65 Step 3: Enter t
Page 29 and 30: Configuration 29/65 Step 4C: ‣ Se
Page 31 and 32: Configuration 31/65 Figure 13: Wind
Page 33 and 34: Configuration 33/65 Step 5C: If nec
Page 35 and 36: Configuration 35/65 Step 6: Downloa
Page 37 and 38: Configuration 37/65 Step 8: Saving
Page 39 and 40: Configuration 39/65 6.3.2 Ethernet
Page 41 and 42: Configuration 41/65 • Minimum Sta
Page 43 and 44: Configuration 43/65 The device NL50
Page 45 and 46: Configuration 45/65 Figure 28: Wind
Page 47 and 48: Troubleshooting 47/65 7 Troubleshoo
Page 49 and 50: Troubleshooting 49/65 7.2 Failure i
Page 51 and 52: Device Drawings and Connections 51/
Page 53 and 54: Device Drawings and Connections 53/
Page 55 and 56: LED 55/65 LED-Display Status netLIN
Page 57 and 58: Technical Data 57/65 NL 50-MPI Para
Page 59 and 60: Error Numbers 59/65 12 Error Number
Page 61 and 62: Error Numbers 61/65 Error Number De
Page 63 and 64: Lists 63/65 14 Lists 14.1 List of F
Page 65: Contacts 65/65 15 Contacts Headquar

netLINK NL 50-MPI

Create successful ePaper yourself

Delete template?

Save as template?