netLINK NL 50-MPI

More documents

Recommendations

Info

Configuration 38/65 6.3 Description of the Parameter 6.3.1 IP Address Figure 23: Settings > NetLink Parameter > IP Address Description: The description of the device is shown in SyCon as the name of the device. The description is changeable in this field. The handing over of the IP parameters (IP address, Net mask, Gateway) can result in three ways. 1. DHCP: The device gets the IP parameters from a DHCP server. 2. BOOTP: The device gets the IP parameters from a BOOTP server. 3. IP address, Net mask and Gateway: The IP parameters can be entered in this fields. If more than one configuration way is activated (for example DHCP and manually entered IP parameters), the device tries to process the different configuration way one after the other. As soon as it got an IP configuration in one of this ways, the device starts with this parameters. netLINK NL 50-MPI Ethernet | Installation, Operation and Hardware Description DOC080604UM05EN | Revision 5 | English | 2011-09 | Released | Public © Hilscher, 2008-2011
Configuration 39/65 6.3.2 Ethernet Parameter Figure 24: Settings > NetLink Parameter > Ethernet Description: The description of the device is shown in SyCon as the name of the device. The description is changeable in this field. Auto detect: This option is set. An automatic detection of the Ethernet interface is done by the device. Interface: Is detected automatically. Auto negotation: Auto negotation means, that in case of two connected devices the devices detect the hardware and the features (for example Half- or Full Duplex, 10 or 100 Mbits and so on) of the other device. This option is preselected. Duplex mode: Duplex mode of the Ethernet interface. Is detected automatically. Speed: Transmission speed of the data in MBits/s: 10 MBits/s and 100 MBits/s. Is detected automatically. netLINK NL 50-MPI Ethernet | Installation, Operation and Hardware Description DOC080604UM05EN | Revision 5 | English | 2011-09 | Released | Public © Hilscher, 2008-2011
Page 1 and 2: User Manual netLINK NL 50-MPI Insta
Page 3 and 4: Introduction 3/65 4.3 Ethernet Conn
Page 5 and 6: Introduction 5/65 1 Introduction 1.
Page 7 and 8: Introduction 7/65 1.2 Contents of t
Page 9 and 10: Introduction 9/65 1.3 Legal Notes 1
Page 11 and 12: Introduction 11/65 1.3.5 Export Reg
Page 13 and 14: Safety 13/65 2.4 Labeling of Safety
Page 15 and 16: Safety 15/65 2.6 Safety Instruction
Page 17 and 18: Description and Requirements 17/65
Page 19 and 20: Getting Started 19/65 4 Getting Sta
Page 21 and 22: Installing Software 21/65 5.2 Insta
Page 23 and 24: Configuration 23/65 6 Configuration
Page 25 and 26: Configuration 25/65 5. Connecting t
Page 27 and 28: Configuration 27/65 Step 3: Enter t
Page 29 and 30: Configuration 29/65 Step 4C: ‣ Se
Page 31 and 32: Configuration 31/65 Figure 13: Wind
Page 33 and 34: Configuration 33/65 Step 5C: If nec
Page 35 and 36: Configuration 35/65 Step 6: Downloa
Page 37: Configuration 37/65 Step 8: Saving
Page 41 and 42: Configuration 41/65 • Minimum Sta
Page 43 and 44: Configuration 43/65 The device NL50
Page 45 and 46: Configuration 45/65 Figure 28: Wind
Page 47 and 48: Troubleshooting 47/65 7 Troubleshoo
Page 49 and 50: Troubleshooting 49/65 7.2 Failure i
Page 51 and 52: Device Drawings and Connections 51/
Page 53 and 54: Device Drawings and Connections 53/
Page 55 and 56: LED 55/65 LED-Display Status netLIN
Page 57 and 58: Technical Data 57/65 NL 50-MPI Para
Page 59 and 60: Error Numbers 59/65 12 Error Number
Page 61 and 62: Error Numbers 61/65 Error Number De
Page 63 and 64: Lists 63/65 14 Lists 14.1 List of F
Page 65: Contacts 65/65 15 Contacts Headquar

netLINK NL 50-MPI

Create successful ePaper yourself

Delete template?

Save as template?