netLINK NL 50-MPI

More documents

Recommendations

Info

Configuration 42/65 • GAP Update Factor (G) Factor for determining after how many Token cycles an added participant is accepted into the Token ring. After expiry of the time period G*T TR , the Station searches to see whether a further participant wishes to be accepted into the logical ring. Value range: 1.. 100 • Max number of telegram retries (Max_Retry_Limit) Maximum number of repeats in order to reach a Station. Value range: 1.. 8 • Highest Station Address (HSA) Station address of the highest active (Master) Station. Value range: 2.. 126 netLINK NL 50-MPI Ethernet | Installation, Operation and Hardware Description DOC080604UM05EN | Revision 5 | English | 2011-09 | Released | Public © Hilscher, 2008-2011
Configuration 43/65 The device NL50-MPI supports the automatic baudrate detection. Note: The automatic detection of the PROFIBUS baudrate can only be used, when additionally to the netLINK NL 50-MPI another PROFIBUS Master is available on the PROFIBUS network. Note: The automatic detection of the PROFIBUS baudrate can only be used, when the control unit sends the PROFIBUS parameters via a broadcast telegram on the PROFIBUS network. Note: A download of the configuration has to be done to activate these setting in the device. Note: The device uses the new configuration/the new parameters after a reset. To set the automatic baudrate detection, select in the list of Bus profile the setting PROFIBUS and then select in the list Baud rate the setting AutoBaud. Figure 26: Settings > NetLink Parameter > PROFIBUS > Autobaud netLINK NL 50-MPI Ethernet | Installation, Operation and Hardware Description DOC080604UM05EN | Revision 5 | English | 2011-09 | Released | Public © Hilscher, 2008-2011
Page 1 and 2: User Manual netLINK NL 50-MPI Insta
Page 3 and 4: Introduction 3/65 4.3 Ethernet Conn
Page 5 and 6: Introduction 5/65 1 Introduction 1.
Page 7 and 8: Introduction 7/65 1.2 Contents of t
Page 9 and 10: Introduction 9/65 1.3 Legal Notes 1
Page 11 and 12: Introduction 11/65 1.3.5 Export Reg
Page 13 and 14: Safety 13/65 2.4 Labeling of Safety
Page 15 and 16: Safety 15/65 2.6 Safety Instruction
Page 17 and 18: Description and Requirements 17/65
Page 19 and 20: Getting Started 19/65 4 Getting Sta
Page 21 and 22: Installing Software 21/65 5.2 Insta
Page 23 and 24: Configuration 23/65 6 Configuration
Page 25 and 26: Configuration 25/65 5. Connecting t
Page 27 and 28: Configuration 27/65 Step 3: Enter t
Page 29 and 30: Configuration 29/65 Step 4C: ‣ Se
Page 31 and 32: Configuration 31/65 Figure 13: Wind
Page 33 and 34: Configuration 33/65 Step 5C: If nec
Page 35 and 36: Configuration 35/65 Step 6: Downloa
Page 37 and 38: Configuration 37/65 Step 8: Saving
Page 39 and 40: Configuration 39/65 6.3.2 Ethernet
Page 41: Configuration 41/65 • Minimum Sta
Page 45 and 46: Configuration 45/65 Figure 28: Wind
Page 47 and 48: Troubleshooting 47/65 7 Troubleshoo
Page 49 and 50: Troubleshooting 49/65 7.2 Failure i
Page 51 and 52: Device Drawings and Connections 51/
Page 53 and 54: Device Drawings and Connections 53/
Page 55 and 56: LED 55/65 LED-Display Status netLIN
Page 57 and 58: Technical Data 57/65 NL 50-MPI Para
Page 59 and 60: Error Numbers 59/65 12 Error Number
Page 61 and 62: Error Numbers 61/65 Error Number De
Page 63 and 64: Lists 63/65 14 Lists 14.1 List of F
Page 65: Contacts 65/65 15 Contacts Headquar

netLINK NL 50-MPI

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?