OPERATING MANUAL - Bad Request
OPERATING MANUAL - Bad Request
OPERATING MANUAL - Bad Request
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Delivery, Transport and Setting Up<br />
3.4.1 Base (accessory)<br />
The incubator can be placed on a base ( Fig. 8 ).<br />
3.4.2 Stacking frame (accessory)<br />
Two appliances of the same model size can be placed on top of one another. To do this, foot<br />
alignment provisions must be attached to the lower oven ( Fig. 9 ):<br />
1. Remove the housing cover from the lower oven.<br />
2. Insert drilling template (supplied with the foot alignments) into the overturned lid.<br />
3. Mark drilling points and drill with a 4.2 mm diameter drill bit.<br />
4. Screw the foot alignment provisions to the top of the lid with the screws and nuts supplied.<br />
5. Put the covers back on.<br />
Fig. 8 Base<br />
22<br />
Fig. 9 Assembly of the foot alignment<br />
provisions when two incubators are<br />
placed on top of one another
Change language