Spare Parts - GEA Farm Technologies

Sanitation Equipment
TS 5600 Teat Dip Pump
This air operated pump can be used to operate a complete teat dip spray system and can be used to
pump dip from supply drums to a fill station in the parlor. Can be used to replace existing electric or
vacuum operated spray systems. Using a compressed air pump instead of electric or vacuum eliminates
the problem of pressure switch failure. Air pressure can be regulated to spray high viscosity dips.
Part No.
Description
Vendor No.
4999-1160-498 Teat Dip Pump TS5600
4999-1160-079
Tube Connector 1/4 in. MPT x 1/4
in. Tube
QF14P
4999-1160-200 Pump Teflon P56T
4999-1160-209 Pump Viton P56V
4999-1160-265 Pump Hose Barb 3/8 in. HB5638
4999-1160-394 Regulator Valve R25
4999-1160-204 Diaphragm Set w/ O-rings 20730000A
SUPPLIES
Teat Dip Chemical Dispenser (DC-11)
The standard DC-11 dual pump system is capable of dispensing teat dip products to two areas in the
milking parlor or it can also be employed to a redundant system with built-in pump that guarantees
100% up time performance. DC-11 system comes with two 3-gpm air operated pumps. A three-way
valve pump selector, pressure regulator with filter dryer, stainless steel watertight case and stainless steel
mounting brackets.
Description Part No.
DC-11 Pump 4999-1160-352
3-Way Valve 4999-1160-354
Fitting Suction/Discharge 4999-1160-355
Fitting for Air Inlet 4999-1160-356
Check Valve for Pump 4999-1160-357
Air Pressure Regulator 4999-1161-051
Electric Teat Spray Pump
•115/230 VAC to 24 VAC power supply •Continuous duty rated motor •Smooth "non-pulsing"
dispensing •Operates up to 6 spray wands •Viton internal parts with polypropylene pump head •Stainless
steel cabinet •70 PSI [5 bar] Pressure switch
Description Part No.
Electric Teat Dip Spray Pump 4999-1159-012
GEA Farm Technologies 194