Spare Parts - GEA Farm Technologies

Sanitation Equipment
SUPPLIES
Bender 9650 Solid State Control Module
•Adjustable rinse, drain and wash cycles •Failsafe monitoring timer •24 hour clock for automatic
pre-sanitize •Door interlock •110V operation
Description Part No.
Bender 9650 Timer Module 110V 4999-1010-496
Bender 9740 Jar Dispenser
Chemical Dispenser for Wash Systems
•Manual Fill Jar Style Dispenser — 40 gallons of wash water or less. •Includes hot and cold water fill valve
•25 ft. of water hose and sink bracket •30 oz. [880 ml] of chemical capacity in each jar •15 gpm [50 liter]
water fill rate •110V operation •Can be used with 8950, 9650 and other wash controls
Description Part No.
Bender 9740 Jar Dispenser 4999-1010-546
Bender 9590/9595 Peristaltic Pump Dispenser
•3-20 oz. [590ml] per minute peristaltic pumps •Inlet hose weights and strainers •110 V operation •With
or without water valves or cycle timers •20 gpm [68 lpm] water flow rate •CSA approved •Can be used
with 8950, 9650 and other wash controls
Description Part No.
Bender 9590 Dispenser w/Valves & w/o Timers 4999-1010-489
Bender 9590 Dispenser w/Water Valves 4999-1010-492
Bender 9595 Dispenser w/o Water Valves 4999-1010-493
Bender 7540 Diverter
This sink-mounted electrically operated diverter valve allows the heavily soiled initial rinse water to be
diverted directly to a drain.
Description Part No.
7540-240 Diverter 220V 4999-1010-498
7540 Diverter 110V 4999-1010-499
Bender Air Injector
For slug washing of milk lines
•Electrically operated rotary valve •Connects to the intake end of permanent line with plastic tube •Dual
alternating output for dual circuit lines or parlor use •110V operation
Description Part No.
110V Air Injector 4999-1010-530
209