Spare Parts - GEA Farm Technologies

SUPPLIES
Sanitation Equipment
Variable Speed Universal Dip Pump
Teat dip pump 0-1.2 GPM variable speed and pump timer, w/70 PSI pressure switch.
Includes push button ON, 110 Vac plug, drum wand, hose clamps, pump fittings, Viton seals.
Description Part No.
Reinforced Plastic Tubing 3/8 in. I.D. x 100 ft. roll 4999-1010-825
Teat Dip VS 0-1.2 GPM Viton 4999-1159-294
Electric Teat Dip Transfer, Barrier Spray or Pipeline/Milk Tank Pump (wash up)
•110 Volt •Quick release fittings •Quick disconnect electrical connection to pump •70 PSI (5 bar) pressure
switch turns pump off/on •Fuse protection with main power on - off switch •Transfer only — not for
spraying •Viton internal parts with polypropylene pump head
Description Part No.
Electric Teat Dip Transfer Pump for Lo-Viscosity Dips (1.5 GPM) 4999-1159-033
Electric Teat Dip Transfer Pump for Hi-Viscosity Dips (3.2 GPM) 4999-1159-034
Teat Spray Wand from Knight
Complete teat dip with variable flow nozzle and tubing connectors. Connectors are 3/8 in. O.D.
Part No.
4999-1159-013
Description
Teat Dip Wand with Adjustable
Nozzle
4999-1159-025 Lance A
4999-1159-075 Handle B
4999-1159-076 Pin C
4999-1159-077 Connector D
4999-1159-086 Nozzle E
Ref. No.
JetStream 2000 Hi-Power Teat Spray System
The AJS/2000 vacuum operated teat spray is the most advanced device of its kind in the world. •Unique
self regulating pressure at the spray head provides for an optimum spray pattern at all times •Fully
vacuum operated — no electricity required and no power switches, operated in conjunction with your
milking machine •Pressure can be changed — standard pressure module is suitable for use with all
proprietary brands of recognized teat spray chemicals •Proven reliability from the largest supplier of teat
disinfection devices in the world. This 2nd generation teat spray system employs only fully tested and
proven components •Designed and manufactured from the highest quality chemical resistant materials
for strength and durability •Low cost maintenance with a comprehensive range of spare parts readily
available •Can be expanded up to a 50–gun system •All tubing, teat spray drops and spray guns are
interchangeable with ATS 400 teat spray units •50 PSI (standard)-improves the misting of spray teat dips
over lesser PSI units, including Spraymaster and even the ATS-400 •5 spray guns can be used at the same
time
195