Spare Parts - GEA Farm Technologies

Lubricants, Vacuum Pump Oil & Rust Preventatives
Fluid Film Aerosol
Hundreds of uses around the farm and home. Fluid Film is an environmentally
friendly, non-toxic, long lasting, penetrant, lubricant, and corrosion preventative. Its
formulation has been used for over 50 years in highly corrosive marine environment
of ships and off-shore drilling rigs. Use this superior product on milk stall hinges,
cylinder shafts or any place where lubricant is needed. **U.S. only
Description Part No.
Fluid Film Aerosol, 11.75 oz.** 4999-1110-700
Fluid Film Liquid A, gal. 4999-1110-710
Petro Gel
Contains USP mineral oil and other USP ingredients.
Description Part No.
Petro Gel 4 oz. tube 4999-1110-708
VACUUM SYSTEMS
CIP Lube
A tasteless, odorless gel for lubricating O-rings, valves, gaskets, and slides.
Description Part No.
CIP Lube 4 oz. tube 4999-1110-709
Team Vacuum Pump Oil
Excellent vane and piston pump performance, resists oxidation, superior low temperature flow capability,
excellent rust preventative capabilities, low tendency toward filter blockage, non-foaming.
Description Part No.
Vacuum Pump Oil 2.5 gal. (9.5L) (cs/2) (36 cs per Pallet) 4999-1110-720
Alamo Vacuum Pump Oil
Alamo vacuum pump oil is recommended for all Alamo pumps. It is a combination of high viscosity and a
scientific blend of rust and oxidizing inhibitors to give your pump the protection it needs.
Description Part No.
5 gal. 7750-0010-544
1 gal. (cs/4) 7750-0210-636
93