LOWRANCE | Marine
LOWRANCE | Marine
LOWRANCE | Marine
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1.<br />
Select RADIO SETUP then NMEA OUT.<br />
2.<br />
Select ON/OFF then press ENTER to confirm your desired choice.<br />
4-8 DSC Setup (US only)<br />
The submenu is used to set behavior of the function. Items are available for selection. Hold<br />
down CALL/MENU then select DSC SETUP, press ENTER to enter DSC SETUP submenu in<br />
which there are 5:<br />
User MMSI<br />
INDIV REPLY<br />
LL REPLY<br />
Group SETUP<br />
DSC SELECT<br />
4-8-1 Enter or Check Your USER MMSI (USER MMSI)<br />
Note: You must enter your user MMSI before you can access the DSC functions.<br />
When you have entered your MMSI correctly, you can display it any time.<br />
>USER MMSI<br />
GROUP SETUP<br />
INDIV REPLY<br />
INPUT USER<br />
MMSI<br />
--------------------<br />
USER MMSI<br />
876543210<br />
>STORE<br />
CANCEL<br />
USER MMSI<br />
INPUT AGAIN<br />
----------------------<br />
USER MMSI<br />
876543210<br />
>STORE<br />
CANCEL<br />
1.<br />
2.<br />
The cursor is at DSC SETUP and press ENTER.<br />
The cursor is at USER MMSI. Press ENTER.<br />
If you have already entered your MMSI, it is shown on the screen.<br />
If this is the first time that you are entering your MMSI, a dashed line appears with the<br />
cursor under the first position. You need to enter your MMSI along the dashed line, one<br />
number at a time.<br />
3. Press CH / to select the first number of your MMSI. Press ENTER to confirm the<br />
number and move to the next position. If you make an error, select the < character then<br />
press ENTER to backup.<br />
4.<br />
When you have entered the last number, push ENTER to advance to the next screen.<br />
The cursor is at STORE.<br />
Lowrance - LHR-80 Installation and Operation Instructions 41