LOWRANCE | Marine
LOWRANCE | Marine
LOWRANCE | Marine
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1.<br />
2.<br />
Select GET BUDDY and then press ENTER.<br />
Select ON or OFF as required, then press ENTER to confirm the selection.<br />
Note: For EU, use clone software to Enable/Disable the GET BUDDY menu.<br />
4-11 Track Log<br />
Set the distance interval to 25m, 50m, or 100m for recording the track points when<br />
navigating.<br />
menu select<br />
dsc setup<br />
get buddy<br />
>Track log<br />
track log<br />
25m<br />
>50m<br />
100m<br />
1. Select TRACK LOG, then press ENTER, the 25m, 50m, 100m appear on the screen.<br />
2. Select your desired and press ENTER to confirm.<br />
4-12 Erase Track<br />
Erase the TRACK HISTORY from the plotter screen.<br />
menu select<br />
get buddy<br />
tRACK LOG<br />
>erase track<br />
erase track<br />
yes<br />
>no<br />
1.<br />
2.<br />
Select ERASE TRACK, then press ENTER, the radio asks for confirmation.<br />
Select Yes, then press ENTER to erase the track line of the plotter screen.<br />
4-13 Reset (Reset to factory defaults)<br />
Use RESET to return every setting on the radio to the factory defaults, except your MMSI,<br />
Group MMSIs and ATIS MMSI.<br />
MENU SELECT<br />
TRACk log<br />
erase track<br />
> RESET<br />
RESET RADIO<br />
ARE YOU SURE<br />
>YES<br />
no<br />
menu select<br />
dsc setup<br />
get buddy<br />
> reset<br />
1.<br />
2.<br />
Select RESET, press ENTER, the radios asks for confirmation.<br />
Select yes, press ENTER to reset the radio and return to the menu.<br />
Lowrance - LHR-80 Installation and Operation Instructions 47