LOWRANCE | Marine
LOWRANCE | Marine
LOWRANCE | Marine
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.<br />
5.<br />
6.<br />
(Optional) If you want to save this log entry in your BUDDY LIST, move the cursor to<br />
MMSI then press ENTER and enter a buddy name. The MMSI is automatically displayed.<br />
The cursor is at CALL BACK. Press ENTER.<br />
Select the working channel and press ENTER.<br />
Note: Duplex channels cannot usually be called and are automatically eliminated from the<br />
suggested call list. If the call is to a Coast Station, the channel is selected automatically.<br />
7.<br />
8.<br />
9.<br />
10.<br />
The call details are shown. Pushes ENTER to send the call. The Tx icon is shown on the<br />
screen while the call is being sent.<br />
If the call is acknowledged, press PTT to talk.<br />
If there is no reply (UNABLE TO ACKNOWLEDGE), a message asks if you want to retry<br />
(SEND AGAIN?).<br />
Select YES, then press ENTER to retry the call.<br />
This cycle repeats twice. If the call still cannot be placed, the radio returns to normal<br />
operation.<br />
5-6 Reply to a call in your Distress Log<br />
Your distress log contains the contact details of the 10 most recent relayed distress calls, so<br />
that you can reply to any of these quickly. When the distress log is full, the oldest entry is<br />
overwritten to select the priority level.<br />
DSC CALL<br />
ALL SHIPS<br />
CALL LOG<br />
>DIST LOG<br />
DISTRESS<br />
10:03 UTC<br />
82◦ 50.123’N’<br />
127◦ 45.456’W<br />
LVR-880<br />
DISTRESS<br />
PIRACY<br />
ALL RELAY<br />
LVR-880<br />
>CALL BACK<br />
DELETE<br />
LVR-880<br />
INDIVIDUAL<br />
ROUTINE<br />
>SET CHANNEL<br />
LVR-880<br />
INDIVIDUAL<br />
ROUTINE<br />
>SEND?<br />
1.<br />
2.<br />
3.<br />
Press DSC MENU to show the DSC CALL menu.<br />
The cursor is at LAST CALL. Move the cursor to DIST CALL and push ENTER.<br />
The contact details of the most recent incoming distress call are shown as the first entry<br />
(01) in the distress log. Move the cursor to step through the distress calls and select the<br />
entry that you want to call.<br />
The details are displayed over two screens that alternate every 1.5 seconds: one screen<br />
shows the location and UTC time of the boat in distress. The other screen shows the nature<br />
of the emergency (if specified) and the MMSI of the boat that relayed the distress call.<br />
Lowrance - LHR-80 Installation and Operation Instructions 53
Change language