LOWRANCE | Marine

More documents

Recommendations

Info

1. 2. 3. 4. 5. 6. 7. 8. Press CALL/MENU to show the DSC CALL menu. The cursor is at LAST CALL Move the cursor to ALL SHIPS and press ENTER. The ALL SHIPS priority is set automatically to ROUTINE but there are 3 priority levels available: URGENCY: when a serious situation or problem has occurred and could lead to a distress situation. SAFETY: to send safety information to all other boats in range. ROUTINE: to send a routine call to all other boats in range. Move the cursor to the priority level that is appropriate to your present situation then press ENTER. Select the working channel and press Enter. Duplex channels which are not usually called are automatically eliminated from the suggested call list. The radio asks for confirmation of the ALL SHIPS call. Press ENTER to select YES and send the ALL SHIPS call. The Tx icon is displayed on the screen while the call is being sent. If the call is acknowledged press PTT to speak. 5-5 Reply to a call in your Call Log Your call log contains the contact details of the 20 most recent incoming calls - so you can use the call log to reply to any of these quickly. When the call log is full, the oldest entry is overwritten. Therefore, to select the priority level: DSC CALL GROUP ALL SHIPS >CALL LOG 112345678 INDIVIDUAL ROUTINE 09:45 utc 112345678 >CALL BACK DELETE SAVE MMSI 112345678 individual routine >set channel 112345678 individual routine >sent? 1. 2. 3. Press call/menu to show the DSC CALL menu. The cursor is at last call. The contact details of the most recent incoming call are shown. 52 Lowrance - LHR-80 Installation and Operation Instructions
4. 5. 6. (Optional) If you want to save this log entry in your BUDDY LIST, move the cursor to MMSI then press ENTER and enter a buddy name. The MMSI is automatically displayed. The cursor is at CALL BACK. Press ENTER. Select the working channel and press ENTER. Note: Duplex channels cannot usually be called and are automatically eliminated from the suggested call list. If the call is to a Coast Station, the channel is selected automatically. 7. 8. 9. 10. The call details are shown. Pushes ENTER to send the call. The Tx icon is shown on the screen while the call is being sent. If the call is acknowledged, press PTT to talk. If there is no reply (UNABLE TO ACKNOWLEDGE), a message asks if you want to retry (SEND AGAIN?). Select YES, then press ENTER to retry the call. This cycle repeats twice. If the call still cannot be placed, the radio returns to normal operation. 5-6 Reply to a call in your Distress Log Your distress log contains the contact details of the 10 most recent relayed distress calls, so that you can reply to any of these quickly. When the distress log is full, the oldest entry is overwritten to select the priority level. DSC CALL ALL SHIPS CALL LOG >DIST LOG DISTRESS 10:03 UTC 82◦ 50.123’N’ 127◦ 45.456’W LVR-880 DISTRESS PIRACY ALL RELAY LVR-880 >CALL BACK DELETE LVR-880 INDIVIDUAL ROUTINE >SET CHANNEL LVR-880 INDIVIDUAL ROUTINE >SEND? 1. 2. 3. Press DSC MENU to show the DSC CALL menu. The cursor is at LAST CALL. Move the cursor to DIST CALL and push ENTER. The contact details of the most recent incoming distress call are shown as the first entry (01) in the distress log. Move the cursor to step through the distress calls and select the entry that you want to call. The details are displayed over two screens that alternate every 1.5 seconds: one screen shows the location and UTC time of the boat in distress. The other screen shows the nature of the emergency (if specified) and the MMSI of the boat that relayed the distress call. Lowrance - LHR-80 Installation and Operation Instructions 53
Page 1 and 2: www.lowrance.com LHR-80 Handheld Ma
Page 3 and 4: Contents Safety and Operational Inf
Page 5 and 6: Section 5 - Sending and Receiving D
Page 7 and 8: FCC Statement This device complies
Page 9 and 10: Section 2 - Controls and Keys VHF A
Page 11 and 12: Press and hold down SCAN for more t
Page 13 and 14: Section 3 - VHF Radio Operation 3-1
Page 15 and 16: This radio supports NMEA0183 for ou
Page 17 and 18: 3-3 Installing and Removing the Ant
Page 19 and 20: 3-7 Channel selection To manually s
Page 21 and 22: 3-11 Scan Operation Scanning is an
Page 23 and 24: • SQL Go to WP select Mode •
Page 25 and 26: Hold down the CALL/ MENU key to ent
Page 27 and 28: 4-1-2 Edit a buddy name MENU select
Page 29 and 30: 4-2-2 Edit a waypoint MENU SELECT >
Page 31 and 32: 1. 4-3 Backlight Adjustment Select
Page 33 and 34: 1. 2. 3. Select GPS/DATA in radio s
Page 35 and 36: L M Y X W V U T S R Q P O N Z A B C
Page 37 and 38: 4-6-8 Turn GPS ENABLE on/off settin
Page 39 and 40: RADIO SETUP UIC >CH NAME RING VOLUM
Page 41 and 42: 1. Select RADIO SETUP then NMEA OUT
Page 43 and 44: 8. When you have entered the last n
Page 45 and 46: DSC SETUP ATIS SELECT DSC SELECT >L
Page 47 and 48: 1. 2. Select GET BUDDY and then pre
Page 49 and 50: WARNING This radio is designed to g
Page 51: 6. If the call is acknowledged (ACK
Page 55 and 56: 5-8 Request the LL position of a bu
Page 57 and 58: As soon as you start tracking, an L
Page 59 and 60: 5-12-3 Do not reply to an LL positi
Page 61 and 62: 6-2 Receive a Distress Call 1234567
Page 63 and 64: 3. Either select: • INDIV RELAY.
Page 65 and 66: A-3 Transmitter: Power Output Modul
Page 67 and 68: 62 156.125 160.725 D Port Operation
Page 69 and 70: 68 156.425 156.425 S Boat Operation
Page 71 and 72: 62A 156.125 156.125 S Canadian Coas
Page 73 and 74: Appendix C - EU Inland Waterway Cha
Page 75 and 76: Explanation of specific footnotes i
Page 77 and 78: Navico Full One-Year Lowrance VHF W
Page 79 and 80: Accessory Ordering Information for

LOWRANCE | Marine

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?