Pilatus PC-21 - HT-Modellbau
Pilatus PC-21 - HT-Modellbau
Pilatus PC-21 - HT-Modellbau
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Building instruction <strong>PC</strong>-<strong>21</strong> Version 0.5e/ 30.10.2008<br />
10.1 <strong>PC</strong>-<strong>21</strong> 1:3.7 (big)<br />
Aileron<br />
+20, -15 mm (based on the wing outside)<br />
Elevators<br />
± 25 mm<br />
Rudder<br />
± 40 mm<br />
Landing flaps Pos 1 15 mm (measured with the fuselage)<br />
Pos 2 65 mm<br />
Expo aprox. 30 – 40 % depending upon taste.<br />
The batteries should be place in front as far as<br />
possible (receiver, valves on servo board of<br />
the nose gear), the emphasis is measured 200-<br />
<strong>21</strong>0 mm from the wing front edge. With the<br />
installation of the servo cables on the fact it<br />
respects that they are distant from the battery<br />
and automatic controller as far as possible.<br />
The antenna should be shifted outside of the<br />
fuselage.<br />
200 – <strong>21</strong>0 mm<br />
www.jetarrows.com<br />
32/32 www.ht-modellbau.ch