Pilatus PC-21 - HT-Modellbau
Pilatus PC-21 - HT-Modellbau
Pilatus PC-21 - HT-Modellbau
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Building instruction <strong>PC</strong>-<strong>21</strong> Version 0.5e/ 30.10.2008<br />
Fuselage<br />
All GRP parts has residues from Parting agent and need to be cleaned<br />
If necessary rework the cut off seam.<br />
4.1 Frame<br />
Glue the front undercarriage support like<br />
the image show.<br />
picture 1 shows the den nose gear pit<br />
Cut the front undercarriage cover after the outliner.<br />
Resins the frame with epoxy mixture (epoxy thickened with micro balloon and cotton flakes) in<br />
the fuselage like the picture shows. But rough on first the fuselage with sand paper.<br />
picture 2 shows the glued front<br />
undercarriage cover<br />
www.jetarrows.com<br />
6/32 www.ht-modellbau.ch