Errata Sheet - Infineon
Errata Sheet - Infineon
Errata Sheet - Infineon
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Errata</strong> <strong>Sheet</strong><br />
XC161CS-32F, (E)ES-BB, BB<br />
Deviations from Electrical- and Timing Specification<br />
4 Deviations from Electrical- and Timing Specification<br />
M40_WLE_X.001 Minimum Ambient Temperature for Flash Wordline Erase<br />
Command<br />
When the Erase Wordline command is executed at low temperature, data in other<br />
wordlines of the same physical 64 Kbyte sector may unintentionally be modified in<br />
addition.<br />
The effect depends primarily on the ambient temperature and the internal CPU<br />
frequency, and may vary from device to device.<br />
Workarounds (choices):<br />
• Do not use the Erase Wordline Command below -20°C<br />
• Reduce the internal CPU frequency to 0.5 MHz when using the Erase Wordline<br />
Command below -20°C. After the Erase Wordline Command has been started, the<br />
CPU frequency may be increased again to the target value.<br />
• Use the Erase Sector Command instead of the Erase Wordline Command.<br />
<strong>Errata</strong> <strong>Sheet</strong> 27/50 V1.1, 2007-06-21