User's Guide Command Line Interface - QLogic

Preface
Switch Models and Examples
Switch Models and Examples
The commands and displays of the command line interface vary depending on the
switch model. All examples in this guide are taken from a QLogic 5802V switch
unless stated otherwise.
Intended Audience
This guide is intended for individuals who are responsible for installing and
servicing Fibre Channel equipment using the command line interface.
Related Materials
The following manuals and materials are referenced in the text and/or provide
additional information.
• QLogic 5800V Series Stackable Fibre Channel Switch Installation Guide
• QLogic 5800V Series QuickTools Switch Management User’s Guide
• QLogic 5800V Series Enterprise Fabric Suite User’s Guide
• QLogic Fibre Channel Switch Event Message Reference Guide
• Simple Network Management Protocol Reference Guide
• CIM Agent Reference Guide
• QLogic Storage Networking Interoperability Guide. This PDF document can
be downloaded at www.qlogic.com.
• Fibre Channel-Arbitrated Loop (FC-AL-2) Rev. 7.0.
• Fibre Channel-10-bit Interface Rev. 2.3.
• Definitions of Managed Objects for the Fabric Element in Fibre Channel
Standard (draft-ietf-ipfc-fabric-element-mib-04.txt).
The Fibre Channel Standards are available from:
Global Engineering Documents, 15 Inverness Way East, Englewood, CO
80112-5776 Phone: (800) 854-7179 or (303) 397-7956
Fax: (303) 397-2740.
xvi
59263-02 B