User's Guide Command Line Interface - QLogic

More documents

Recommendations

Info

3–Network Configuration Managing IP Security Deleting an Association To delete a user-defined association, enter the Ipsec Association Delete command as shown in the following example: SANbox #> admin start SANbox (admin) #> ipsec edit SANbox (admin-ipsec) #> ipsec association delete association_1 The security association will be deleted. Please confirm (y/n): [n] y SANbox (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] y 3-18 59263-02 B
3–Network Configuration Managing IP Security Modifying a User-Defined Association To modify an existing user-defined association, enter the Ipsec Association Edit command in an Admin session and an Ipsec Edit session as shown in the following example. An asterisk (*) indicates a required entry. SANbox (admin-ipsec) #> ipsec association edit h2h-sh-sa A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. To remove a value for an optional attribute, use ’n’. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Current Values: Description Host-to-host: switch->host . . EncryptionKey 123456789012345678901234 New Value (press ENTER to not specify value, 'q' to quit, 'n' for none): Description (string value, 0-127 bytes) : *SourceAddress (IPv4, IPv6 or hostname) : *DestinationAddress (IPv4, IPv6 or hostname) : *Protocol (1=esp, 2=esp-old, 3=ah, 4=ah-old) : ah *SPI (decimal value, 256-4294967295) : Authentication (select an authentication algorithm) 1=hmac-md5 (16 byte key) 2=hmac-sha1 (20 byte key) 3=hmac-sha256 (32 byte key) 4=aes-xcbc-mac (16 byte key) authentication algorithm choice : *AuthenticationKey (quotes string or raw hex bytes) : *Encryption (select an encryption algorithm) 1=des-cbc (8 byte key) 2=3des-cbc (24 byte key) 3=null (0 byte key) 4=blowfish-cbc (5-56 byte key) 5=aes-cbc (16/24/32 byte key) 6=twofish-cbc (32 byte key) encryption algorithm choice : *EncryptionKey (quoted string or raw hex bytes) : Mode (1=transport, 2=tunnel) : The security association has been edited. This configuration must be saved with the 'ipsec save' command before it can take effect, or to discard this configuration use the 'ipsec cancel' command. SANbox (admin-ipsec) #> ipsec save The IPsec configuration will be saved and activated. Please confirm (y/n): [n] y 59263-02 B 3-19
Page 1 and 2: User’s Guide Command Line Interfa
Page 3 and 4: Table of Contents Preface Switch Mo
Page 15 and 16: Preface This guide describes the fe
Page 17 and 18: Preface Technical Support Technical
Page 19 and 20: 1 Command Line Interface Usage This
Page 21 and 22: 1-Command Line Interface Usage Open
Page 23 and 24: 1-Command Line Interface Usage Sett
Page 25 and 26: 1-Command Line Interface Usage Crea
Page 27 and 28: 1-Command Line Interface Usage Down
Page 29 and 30: 2 User Account Configuration User a
Page 31 and 32: 2-User Account Configuration Creati
Page 33 and 34: 3 Network Configuration Network con
Page 35 and 36: 3-Network Configuration Configuring
Page 37 and 38: 3-Network Configuration Verifying a
Page 39 and 40: 3-Network Configuration Managing IP
Page 49: 3-Network Configuration Managing IP
Page 61 and 62: 4 Switch Configuration Switch confi
Page 63 and 64: 4-Switch Configuration Displaying S
Page 69 and 70: 4-Switch Configuration Managing Swi
Page 77 and 78: 4-Switch Configuration Setting the
Page 79 and 80: 4-Switch Configuration Resetting a
Page 81 and 82: 4-Switch Configuration Installing F
Page 83 and 84: 4-Switch Configuration Testing a Sw
Page 91 and 92: 5 Port Configuration This section d
Page 93 and 94: 5-Port Configuration Displaying Por
Page 95 and 96: 5-Port Configuration Displaying Por
Page 97 and 98: 5-Port Configuration Modifying Port
Page 99 and 100: 5-Port Configuration Configuring Tr
Page 101 and 102:
5-Port Configuration Port Binding P
Page 103 and 104:
5-Port Configuration Resetting a Po
Page 105 and 106:
5-Port Configuration Testing a Port
Page 107 and 108:
5-Port Configuration Displaying Ext
Page 109 and 110:
6 Zoning Configuration This section
Page 111 and 112:
6-Zoning Configuration Displaying Z
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
6-Zoning Configuration Configuring
Page 119 and 120:
6-Zoning Configuration Modifying th
Page 121 and 122:
6-Zoning Configuration Removing Ina
Page 123 and 124:
6-Zoning Configuration Managing Zon
Page 125 and 126:
6-Zoning Configuration Managing Ali
Page 127 and 128:
7 Connection Security Configuration
Page 129 and 130:
7-Connection Security Configuration
Page 131 and 132:
8 Device Security Configuration Thi
Page 133 and 134:
8-Device Security Configuration Dis
Page 135 and 136:
8-Device Security Configuration Dis
Page 137 and 138:
8-Device Security Configuration Con
Page 139 and 140:
8-Device Security Configuration Res
Page 141 and 142:
8-Device Security Configuration Man
Page 143 and 144:
8-Device Security Configuration Man
Page 145 and 146:
9 RADIUS Server Configuration Authe
Page 147 and 148:
9-RADIUS Server Configuration Confi
Page 149 and 150:
10 Event Log Configuration This sec
Page 151 and 152:
10-Event Log Configuration Displayi
Page 153 and 154:
10-Event Log Configuration Clearing
Page 155 and 156:
11 Call Home Configuration This sec
Page 157 and 158:
11-Call Home Configuration Call Hom
Page 159 and 160:
11-Call Home Configuration Configur
Page 161 and 162:
11-Call Home Configuration Managing
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
11-Call Home Configuration Testing
Page 169 and 170:
12 Simple Network Management Protoc
Page 171 and 172:
12-Simple Network Management Protoc
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
13 Command Reference This section d
Page 179 and 180:
13-Command Reference Admin Admin Au
Page 181 and 182:
13-Command Reference Alias delete [
Page 183 and 184:
13-Command Reference Callhome histo
Page 185 and 186:
13-Command Reference Callhome The f
Page 187 and 188:
13-Command Reference Capture Exampl
Page 189 and 190:
13-Command Reference Cert_Authority
Page 191 and 192:
13-Command Reference Certificate Ex
Page 193 and 194:
13-Command Reference Config Config
Page 195 and 196:
13-Command Reference Config NOTE:
Page 197 and 198:
13-Command Reference Create Create
Page 199 and 200:
13-Command Reference Create The fol
Page 201 and 202:
13-Command Reference Exit Exit Auth
Page 203 and 204:
13-Command Reference Fctrace Fctrac
Page 205 and 206:
13-Command Reference Feature Featur
Page 207 and 208:
13-Command Reference Firmware Insta
Page 209 and 210:
13-Command Reference Group Keywords
Page 211 and 212:
13-Command Reference Group Table 13
Page 213 and 214:
13-Command Reference Group Table 13
Page 215 and 216:
13-Command Reference Group The foll
Page 217 and 218:
13-Command Reference Help Help Auth
Page 219 and 220:
13-Command Reference Hotreset Hotre
Page 221 and 222:
13-Command Reference Ike List polic
Page 223 and 224:
13-Command Reference Ike Peer Ike P
Page 225 and 226:
13-Command Reference Ike Peer Table
Page 227 and 228:
13-Command Reference Ike Peer The f
Page 229 and 230:
13-Command Reference Ike Policy Ike
Page 231 and 232:
13-Command Reference Ike Policy Tab
Page 233 and 234:
13-Command Reference Ike Policy Lif
Page 235 and 236:
13-Command Reference Ike Policy The
Page 237 and 238:
13-Command Reference Image unpack [
Page 239 and 240:
13-Command Reference Ipsec Ipsec Au
Page 241 and 242:
13-Command Reference Ipsec Associat
Page 243 and 244:
13-Command Reference Ipsec Associat
Page 245 and 246:
13-Command Reference Ipsec List Ips
Page 247 and 248:
13-Command Reference Ipsec List Des
Page 249 and 250:
13-Command Reference Ipsec Policy T
Page 251 and 252:
13-Command Reference Ipsec Policy l
Page 253 and 254:
13-Command Reference Key Key Author
Page 255 and 256:
13-Command Reference Lip Lip Author
Page 257 and 258:
13-Command Reference Passwd Passwd
Page 259 and 260:
13-Command Reference Profile Profil
Page 261 and 262:
13-Command Reference Profile Exampl
Page 263 and 264:
13-Command Reference Ps Ps Authorit
Page 265 and 266:
13-Command Reference Reset Reset Au
Page 267 and 268:
13-Command Reference Reset switch R
Page 269 and 270:
13-Command Reference Reset Table 13
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
13-Command Reference Security Secur
Page 277 and 278:
13-Command Reference Security Examp
Page 279 and 280:
13-Command Reference Securityset Se
Page 281 and 282:
13-Command Reference Securityset Ex
Page 283 and 284:
13-Command Reference Set Beacon Set
Page 285 and 286:
13-Command Reference Set Config Por
Page 287 and 288:
13-Command Reference Set Config Por
Page 289 and 290:
13-Command Reference Set Config Sec
Page 291 and 292:
13-Command Reference Set Config Swi
Page 293 and 294:
13-Command Reference Set Config Thr
Page 295 and 296:
13-Command Reference Set Config Zon
Page 297 and 298:
13-Command Reference Set Log Set Lo
Page 299 and 300:
13-Command Reference Set Log None S
Page 301 and 302:
13-Command Reference Set Pagebreak
Page 303 and 304:
13-Command Reference Set Port Auto
Page 305 and 306:
13-Command Reference Set Setup Call
Page 307 and 308:
13-Command Reference Set Setup Radi
Page 309 and 310:
13-Command Reference Set Setup Radi
Page 311 and 312:
13-Command Reference Set Setup Serv
Page 313 and 314:
13-Command Reference Set Setup Serv
Page 315 and 316:
13-Command Reference Set Setup SNMP
Page 317 and 318:
13-Command Reference Set Setup SNMP
Page 319 and 320:
13-Command Reference Set Setup Syst
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
13-Command Reference Set Timezone S
Page 329 and 330:
13-Command Reference Show About Exa
Page 331 and 332:
13-Command Reference Show Broadcast
Page 333 and 334:
13-Command Reference Show Config Po
Page 335 and 336:
13-Command Reference Show Config Se
Page 337 and 338:
13-Command Reference Show Config Sw
Page 339 and 340:
13-Command Reference Show Config Zo
Page 341 and 342:
13-Command Reference Show Donor Sho
Page 343 and 344:
13-Command Reference Show Fabric Sh
Page 345 and 346:
13-Command Reference Show Interface
Page 347 and 348:
13-Command Reference Show Log Table
Page 349 and 350:
13-Command Reference Show Log The f
Page 351 and 352:
13-Command Reference Show Media Sho
Page 353 and 354:
13-Command Reference Show Media Hig
Page 355 and 356:
13-Command Reference Show Ns Show N
Page 357 and 358:
13-Command Reference Show Pagebreak
Page 359 and 360:
13-Command Reference Show Perf outb
Page 361 and 362:
13-Command Reference Show Port Show
Page 363 and 364:
13-Command Reference Show Port Tabl
Page 365 and 366:
13-Command Reference Show Port Tabl
Page 367 and 368:
13-Command Reference Show Postlog S
Page 369 and 370:
13-Command Reference Show Setup Mfg
Page 371 and 372:
13-Command Reference Show Setup Ser
Page 373 and 374:
13-Command Reference Show Setup Sys
Page 375 and 376:
13-Command Reference Show Setup Sys
Page 377 and 378:
13-Command Reference Show Switch Sh
Page 379 and 380:
13-Command Reference Show System Sh
Page 381 and 382:
13-Command Reference Show Timezone
Page 383 and 384:
13-Command Reference Show Users Sho
Page 385 and 386:
13-Command Reference Show Version E
Page 387 and 388:
13-Command Reference Snmpv3user Snm
Page 389 and 390:
13-Command Reference Test Cancel Te
Page 391 and 392:
13-Command Reference Test Port Note
Page 393 and 394:
13-Command Reference Test Status Th
Page 395 and 396:
13-Command Reference Test Switch No
Page 397 and 398:
13-Command Reference User User Auth
Page 399 and 400:
13-Command Reference User The follo
Page 401 and 402:
13-Command Reference Zone Zone Auth
Page 403 and 404:
13-Command Reference Zone Examples
Page 405 and 406:
13-Command Reference Zoneset create
Page 407 and 408:
13-Command Reference Zoning Active
Page 409 and 410:
13-Command Reference Zoning Clear Z
Page 411 and 412:
13-Command Reference Zoning Delete
Page 413 and 414:
13-Command Reference Zoning Edited
Page 415 and 416:
13-Command Reference Zoning Limits
Page 417 and 418:
13-Command Reference Zoning Merged
Page 419 and 420:
13-Command Reference Zoning Save Zo
Page 421 and 422:
Index Numerics 20Gb stacking port l
Page 423 and 424:
User’s Guide Command Line Interfa
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 436:
Corporate Headquarters QLogic Corpo
show all

User's Guide Command Line Interface - QLogic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?