User's Guide Command Line Interface - QLogic

3–Network Configuration
Managing IP Security
IKE Peer and Policy Information
To display general or specific peer and policy information, enter the Ike List
command. The Ike List command does not require an Admin session nor an Ipsec
Edit session. The Ike Peer List and Ike Policy List commands display the same
information. You can display active, configured, and edited peers and polices:
• Active—peers and policies currently in use
• Configured—peers and policies that have been saved in the IKE database
• Edited—peers and policies that are being edited, but have not yet been
saved
The following example displays all configured IKE peers and policies:
SANbox #> ike list configured
Configured (saved) IKE Information
Peer
Policy
------ ----
peer_1
policy_1
policy_2
peer_2
policy_3
peer_3
(no policies)
(No peer)
policy_4
Summary:
Peer Count 3
Policy Count 4
Public Key Infrastructure Information
To display information in the PKI database about public/private key pairs, signed
certificates, and certificate authorities, enter the following commands:
• Key List
• Certificate List Local
• Cert_Authority List
The following is an example of the Key List command for key512:
SANbox #> key list key512
Key key512:
private key with:
pubkey: RSA 512 bits
keyid: 49:80:4c:aa:d3:c3:bc:c7:f5:b1:41:34:ce:71:48:1d:b9:b3:d9:f9
subjkey: f4:b6:b9:27:25:7a:5a:69:a0:9e:cf:14:cd:3c:88:e9:d5:b1:aa:4a
3-10 59263-02 B