Operating Instructions Blu-ray Disc Player DMP-BD35 - Panasonic
Operating Instructions Blu-ray Disc Player DMP-BD35 - Panasonic
Operating Instructions Blu-ray Disc Player DMP-BD35 - Panasonic
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Regarding 24p output [BD-V]<br />
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in<br />
60 frames/second in accordance with the display format.<br />
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.<br />
NECESSARY CONNECTIONS<br />
≥Connect to a TV supporting 1080/24p input via an HDMI cable.<br />
NECESSARY SETTINGS<br />
≥“24p Output”: “On” (� 32)<br />
Necessary settings<br />
After connecting to the terminals, perform necessary settings.<br />
“BD-Video<br />
Secondary Audio”<br />
“Dolby D/Dolby D +/<br />
Dolby TrueHD”<br />
“DTS/DTS-HD”<br />
“Analog Audio<br />
Output” [BD55]<br />
≥For more information about settings, refer to page 31, 32, 34.<br />
≥When using the different terminal at the same time, the sound may not be output with the desired audio if the setting is incorrect.<br />
In the following case, set “HDMI Audio Output” to “Off”. (� 32)<br />
– When connecting a compatible amplifier/receiver using 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminals, and connecting a compatible television<br />
using HDMI AV OUT terminal<br />
– When connecting a compatible amplifier/receiver using both 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminals and HDMI AV OUT terminal if<br />
outputting the audio from analog terminals<br />
– When connecting a compatible amplifier/receiver using DIGITAL AUDIO OUT terminals, and connecting a compatible television using HDMI AV<br />
OUT terminal<br />
To return to the previous screen<br />
Press [RETURN].<br />
To exit the screen<br />
Press [SETUP].<br />
1) While stopped<br />
Press [SETUP].<br />
2) Press [3, 4] to select “Audio” and press [OK].<br />
3) Press [3, 4] to select “Digital Audio Output” and press [OK].<br />
4) Press [3, 4] to select “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”,<br />
or “BD-Video Secondary Audio” and press [2, 1] to select the option.<br />
1) While stopped<br />
Press [SETUP].<br />
2) Press [3, 4] to select “TV / Device Connection” and press [OK].<br />
3) Press [3, 4] to select “Analog Audio Output” and press [OK].<br />
4) Press [3, 4] to select the option and press [OK].<br />
5) Press [OK].<br />
≥The channel setting screen is displayed. (� 34)<br />
Audio<br />
Dynamic Range Compression<br />
Digital Audio Output<br />
PCM Down Conversion<br />
Downmix<br />
OK<br />
RETURN<br />
Connection<br />
TV Aspect<br />
HDMI Connection<br />
Component Video Resolution<br />
Analog Audio Output<br />
OK<br />
RETURN<br />
Off<br />
Off<br />
Stereo<br />
16:9<br />
480i<br />
2ch + 5.1ch<br />
Getting started<br />
9<br />
RQT9243 or RQT9350