IPCAM-8309FW - CTC Union Technologies Co.,Ltd.

More documents

Recommendations

Info

4.2. <strong>Co</strong>nfiguration of Main Menu Main Menu Camera Click this button to get into common information of all Network Cameras in local network. You can connect the specific Network Cameras to get live video and to optimize video setting. User Click this button to get into user basic setting information of all Network Cameras in network. You can connect the specific Network Cameras to get and set basic values. This section includes Info, User, Date Time, TCP/IP, PPPoE and DDNS. Note: • Only the administrator has access to the Settings. About Click this button to get the information of Intelligent IP Installer. 13
4.3. Camera The Camera page provides you all Network Cameras in the network with product factory information, including product Name, IP Address, MAC, Mod. Name and Mod. ID. Search:Click it to search Network Cameras in the network, it displays Network Cameras information including Name, IP Address, MAC, Mod. Name and Mod. ID. Note: If the camera is not located in local network, it will appear in red text. Some information is not available when the IP camera is not in local network. The IP addresses shown in the "IP Address" field reflect those on the local network. They may be from the DHCP server. If there is no DHCP server, the IP Camera will try to find a free IP address (this takes from 15 second to 3 minutes, depending on the LAN status). The method of finding IP address is seeking from 192.168.1.2, to 192.168.1.254. If any of the address inside this range is free, the Network IP Camera will be assigned to this IP address, and its subnet mask would be 255.255.255.0. Link to IE:After searching Network Cameras in network, you can click to specific Network Cameras in search area and press Link to IE to use IP cameras with Microsoft web browses. 14
Page 1 and 2: IPCAM-8309FW Wireless Dual Stream N
Page 3 and 4: Table of contents 1. INSTALLATION &
Page 5 and 6: 1. Installation & Product SPEC Inst
Page 7 and 8: Product Specification 8
Page 9: 3. Setting up Wireless Configuratio
Page 14 and 15: 4.3.1. Setup Choose a network camer
Page 16 and 17: Date/Time settings: You can set the
Page 18 and 19: PPPoE settings: You can change the
Page 20 and 21: Apply settings: Click on “Apply
Page 22 and 23: 4.3.3. Factory Default Choose a net
Page 24 and 25: 4.4. User The System page provides
Page 26 and 27: From Device:Click it and press Load
Page 28 and 29: 4.4.2. User The Network Camera defa
Page 30 and 31: 4.4.4. TCP/IP HTTP Port:Select port
Page 32 and 33: 4.4.6. DDNS Server Name:Select the
Page 34 and 35: 5. Using IP Camera via Web Browser
Page 36 and 37: 6.1. Initially accessing the IPCAM
Page 38 and 39: 6.2.3. Image Setup You can use the
Page 40 and 41: 6.3. Basic Setting Click the “Bas
Page 42 and 43: up to 64 characters. Time zone:Sele
Page 44 and 45: 6.3.2. Camera 6.3.2.1. General RTSP
Page 46 and 47: MPEG-4 viewer port (If RTSP mode is
Page 48 and 49: 6.3.2.3. M-JPEG Note: • Motion JP
Page 50 and 51: 6.3.3.2. PPPoE Use this setting whe
Page 52 and 53: 6.3.3.4. UPnP This device includes
Page 54 and 55: User name, Password:Type the user n
Page 56 and 57: 6.3.4.2. HTTPS HTTPS is a URI schem
Page 58 and 59: 6.4.1.2. Alarm Sending This functio
Page 60 and 61: 6.4.1.3. Periodical Sending You can
Page 62 and 63:
Authentication:Select the authentic
Page 64 and 65:
Motion Detection:Click this to use
Page 66 and 67:
6.4.3. HTTP Event Use this menu to
Page 68 and 69:
6.4.4. Schedule When you click Sche
Page 70 and 71:
2. A detecting zone 1 appears. Use
show all

IPCAM-8309FW - CTC Union Technologies Co.,Ltd.

Create successful ePaper yourself

Delete template?

Save as template?