IPCAM-8309FW - CTC Union Technologies Co.,Ltd.

More documents

Recommendations

Info

6.3.4.2. HTTPS HTTPS is a URI scheme used to indicate a secure HTTP connection. It is syntactically identical to the http:// scheme normally used for accessing resources using HTTP. Using an https: URL indicates that secure HTTP is to be used, but with a different default TCP port (443) and an additional encryption/authentication layer between the HTTP and TCP. You can use the IP camera through HTTPS easily by using https:// instead of http://. Create & Install: Create a self-signed certificate for HTTPS to recognize. Installed Certificate: Display or remove the properties of the installed certificate. HTTPS <strong>Co</strong>nnection Policy: Set HTTPS connection policy for different level of users. 57
6.4. Advanced Settings 6.4.1. FTP Client Use this setup page to configure capturing and sending of images to an FTP server. By using FTP client function, you can send a video file which has been shot and recorded triggered by the external sensor input, alarm buffer or with the built-in motion detection function to FTP server. FTP client setting menu is composed of three tabs, General, Alarm sending and Periodical sending. 6.4.1.1. General FTP client function:To activate the FTP client function, select On. The FTP client setting page appears. When you do not wish to use the FTP client function, select Off. Note:The frame rate and operability on the main viewer may decrease while a file is being transmitted by the FTP client function. FTP server name:Type the FTP server name to upload still images up to 64 characters, or the IP address of the FTP server. User name:Type the user name for the FTP server. Password:Type the password for the FTP server. Retype password:To confirm the password, type the same characters as you typed in the Password box. Passive mode:Set whether you use the passive or active mode of FTP when connecting to FTP server. Select On to connect to FTP server using the passive mode. 58
Page 1 and 2:
IPCAM-8309FW Wireless Dual Stream N
Page 3 and 4:
Table of contents 1. INSTALLATION &
Page 5 and 6: 1. Installation & Product SPEC Inst
Page 7 and 8: Product Specification 8
Page 9: 3. Setting up Wireless Configuratio
Page 12 and 13: 4.2. Configuration of Main Menu Mai
Page 14 and 15: 4.3.1. Setup Choose a network camer
Page 16 and 17: Date/Time settings: You can set the
Page 18 and 19: PPPoE settings: You can change the
Page 20 and 21: Apply settings: Click on “Apply
Page 22 and 23: 4.3.3. Factory Default Choose a net
Page 24 and 25: 4.4. User The System page provides
Page 26 and 27: From Device:Click it and press Load
Page 28 and 29: 4.4.2. User The Network Camera defa
Page 30 and 31: 4.4.4. TCP/IP HTTP Port:Select port
Page 32 and 33: 4.4.6. DDNS Server Name:Select the
Page 34 and 35: 5. Using IP Camera via Web Browser
Page 36 and 37: 6.1. Initially accessing the IPCAM
Page 38 and 39: 6.2.3. Image Setup You can use the
Page 40 and 41: 6.3. Basic Setting Click the “Bas
Page 42 and 43: up to 64 characters. Time zone:Sele
Page 44 and 45: 6.3.2. Camera 6.3.2.1. General RTSP
Page 46 and 47: MPEG-4 viewer port (If RTSP mode is
Page 48 and 49: 6.3.2.3. M-JPEG Note: • Motion JP
Page 50 and 51: 6.3.3.2. PPPoE Use this setting whe
Page 52 and 53: 6.3.3.4. UPnP This device includes
Page 54 and 55: User name, Password:Type the user n
Page 58 and 59: 6.4.1.2. Alarm Sending This functio
Page 60 and 61: 6.4.1.3. Periodical Sending You can
Page 62 and 63: Authentication:Select the authentic
Page 64 and 65: Motion Detection:Click this to use
Page 66 and 67: 6.4.3. HTTP Event Use this menu to
Page 68 and 69: 6.4.4. Schedule When you click Sche
Page 70 and 71: 2. A detecting zone 1 appears. Use
show all

IPCAM-8309FW - CTC Union Technologies Co.,Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?