IPCAM-8309FW - CTC Union Technologies Co.,Ltd.

Motion Detection:Click this to use the Motion Detection function as a
trigger. You can then setup the motion detection function page.
Note:
• Motion Detection works only when the Video mode is set to MPEG4
and Cropping is set to Off.
Alarm Buffer:Select Use alarm buffer when you want to forward the image
of before and after the alarm detection (pre-alarm, post-alarm). If you do not
select this, only the image of the moment of the alarm detection is forwarded.
Click Alarm buffer to display the Alarm buffer setting menu. For details, see
“Setting the Alarm Buffer — Alarm buffer setting Menu on page.
Alarm Input:
Select the connected alarm.
Sensor input1: The external sensor which is connected to sensor input1 of
the camera I/O port.
Effective period:Set the period when the periodical sending is effective.
Always:The periodical sending is always effective.
Schedule:You can specify the period when the periodical sending is
effective in the schedule setting in the other section. Click Schedule and the
setting menu for the effective period is displayed. (“Setting the Schedule —
Schedule setting Menu” page).
65