IPCAM-8309FW - CTC Union Technologies Co.,Ltd.

More documents

Recommendations

Info

up to 64 characters. Time zone:Select the time zone and time difference from Greenwich Mean Time in the area where the device is installed from the pull-down box. 43
6.3.1.3. Initialization Reboot:Click this button to reboot the device. A confirmation dialogue will appear. Click OK to proceed. It takes about two minutes to reboot the device. Factory default:Click this button to reset the device to the factory default settings. A confirmation dialogue will appear. Click OK to proceed, the network indicator on the device will start to blink. After completing adjustments to the default settings, the device will reboot automatically. Do not turn off the device until the device reboots. Backup setting data:Save the setting data of the device to a file. Click Save, and follow the instructions on the browser to save the setting data file to your specified location. Restore setting:Load the saved setting data of the device. Click Browse and select the file in which the setting data is stored. Click OK, and the device is adjusted according to the loaded data and restarted. Firmware update:Upgrade the device software. Click Browse and select the file for upgrading. A confirmation dialogue will appear. Click OK to start upgrading. The device will reboot upon completion. Note: • Use only upgraded files that are specific for this device. Problems may occur otherwise. • Do not turn off the device power or disconnect the network until the upgrading is completed. Upload language pack: You can click browse button to select the system language pack, including English, Traditional Chinese, Simplified Chinese, German, Japanese or Spanish…etc and upload it. 44
Page 1 and 2: IPCAM-8309FW Wireless Dual Stream N
Page 3 and 4: Table of contents 1. INSTALLATION &
Page 5 and 6: 1. Installation & Product SPEC Inst
Page 7 and 8: Product Specification 8
Page 9: 3. Setting up Wireless Configuratio
Page 12 and 13: 4.2. Configuration of Main Menu Mai
Page 14 and 15: 4.3.1. Setup Choose a network camer
Page 16 and 17: Date/Time settings: You can set the
Page 18 and 19: PPPoE settings: You can change the
Page 20 and 21: Apply settings: Click on “Apply
Page 22 and 23: 4.3.3. Factory Default Choose a net
Page 24 and 25: 4.4. User The System page provides
Page 26 and 27: From Device:Click it and press Load
Page 28 and 29: 4.4.2. User The Network Camera defa
Page 30 and 31: 4.4.4. TCP/IP HTTP Port:Select port
Page 32 and 33: 4.4.6. DDNS Server Name:Select the
Page 34 and 35: 5. Using IP Camera via Web Browser
Page 36 and 37: 6.1. Initially accessing the IPCAM
Page 38 and 39: 6.2.3. Image Setup You can use the
Page 40 and 41: 6.3. Basic Setting Click the “Bas
Page 44 and 45: 6.3.2. Camera 6.3.2.1. General RTSP
Page 46 and 47: MPEG-4 viewer port (If RTSP mode is
Page 48 and 49: 6.3.2.3. M-JPEG Note: • Motion JP
Page 50 and 51: 6.3.3.2. PPPoE Use this setting whe
Page 52 and 53: 6.3.3.4. UPnP This device includes
Page 54 and 55: User name, Password:Type the user n
Page 56 and 57: 6.3.4.2. HTTPS HTTPS is a URI schem
Page 58 and 59: 6.4.1.2. Alarm Sending This functio
Page 60 and 61: 6.4.1.3. Periodical Sending You can
Page 62 and 63: Authentication:Select the authentic
Page 64 and 65: Motion Detection:Click this to use
Page 66 and 67: 6.4.3. HTTP Event Use this menu to
Page 68 and 69: 6.4.4. Schedule When you click Sche
Page 70 and 71: 2. A detecting zone 1 appears. Use

IPCAM-8309FW - CTC Union Technologies Co.,Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?