LFS Cable routing systems - OBO Bettermann

Mounting aid for WDK cable trunking systems
Planning aid, WDK
Mounting of accessory mounting box
The partition is run up to the accessory mounting
box and is locked onto the floor connector.
Mounting of power socket
After the cables have been inserted, the switches
and sockets can be connected and installed
in the accessory mounting boxes.
Mounting of power socket
The cover sections allow easy closure of the
openings on the sockets without any additional
work. These cover sections are available in the
versions 1x to 3x in the product range.
Mounting of power socket
The finished cover sections can create optically
perfect trunking installations with switching and
plug-in devices.
Mounting of CEE socket
The underfloor box 2392 is used to install the
CEE sockets. It can be used to install CEE
sockets in the WDK trunking from a height of
130 mm.
Mounting of CEE socket
The adapter flange allows easy installation of
CEE sockets made by different manufacturers.
Mounting of CEE socket
The adapter flange is fastened, together with
the CEE socket, to the accessory mounting
box.
Mounting of CEE socket
A tidy cover of the CEE sockets is created using
the cover section, type 2425.
Mounting with nail device
Mounting of the cable trunking is fast and efficient
with a Spit nail device.
RK universal trunking
The universal trunking hides the cables inserted
in distributors and counter cabinets.
RK clip mounting
The clips (OBO Quick Clip Pg16) are mounted
using knock-in anchors on the left and right of
the distributor cabinets. They are contained in
the scope of delivery.
RK end piece mounting
The end pieces are fastened by locking them
in the clips.
06 LFS_Katalog_2010_Neuer_Stand / en / 25/02/2010 (LLExport_00995)
16 OBO LFS