LFS Cable routing systems - OBO Bettermann

Mounting aid for device installation trunking Rapid 45
Planning aid, device installation trunking, size 45
Office application area
The many practical fittings permit easy integration
of the Rapid 45 device installation trunking
system into any office situation. Switches, sockets
and data technology are just clicked into
place.
Office application area
Thanks to its asymmetrical design, the Rapid
45 device installation trunking system can also
be mounted as skirting trunking. The sockets
with a 33° arrangement allow easy insertion of
angular connectors.
Workshop application area
The Rapid 45 device installation trunking can
be installed anywhere in which sockets must
be mounted in a small area.
Cut trunking
The Rapid 45 PVC device installation trunking
can be processed using a standard coping
saw, whilst the Rapid 45 aluminium trunking
should be cut with an electrical circular capping
saw.
Mounting of trunking
The Rapid 45 device installation trunking can
be mounted quickly on the wall, for example,
using knock-in anchors.
Mounting of variable fittings
The variable fittings allow an attractive cover,
even for corners which are not at a right angle.
Fixing takes place in the cover contour.
Mounting of fixed fittings
The fixed fittings are integrated in the trunking
base installation.
Mounting of joint connectors
The joint connectors can be separated from
their stalk and serve both as a joint connector
and a joint cover to cover cut edges.
Mounting of joint cover
The joint cover is attached to the trunking bases.
This provides an optically attractive connection
for the trunking bases.
06 LFS_Katalog_2010_Neuer_Stand / en / 25/02/2010 (LLExport_00995)
38 OBO LFS