LFS Cable routing systems - OBO Bettermann

Mounting aid for SKL skirting trunking
Planning aid, SKL
Cable trunking application area
The SKL skirting trunking can be used as a
skirting board in housing. This allows tidy retroinstallation
of cables.
Cable trunking application area with socket
The mounting boxes mean that sockets can
be mounted wherever they are required.
Use of coloured variant
The beech design means that the SKL skirting
trunking can also be used with wooden floors.
Trunking mounting
The base of the SKL skirting trunking is fastened
using bolts and anchors or knock-in anchors.
Mounting of cover
The sealing lip ensures optimum wall and floor
connections. The cover is simply pushed onto
the base.
Mounting of fitting
The fitting is attached to the cover and thus fastened.
This allows the implementation of a visually
attractive installation.
Mounting of device support
The device support is placed on the trunking
base and fastened to the wall with four bolts.
Mounting of Schuko socket
The Schuko socket is connected and mounted
on the screwless terminals located in the base
of the device support.
Mounting of Modul 45 devices
The Modul 45 sockets are connected to the cable
and pushed into the mounting box until a
click can be heard.
Mounting of cover
The cover is run up to the mounting box base
and placed on the base.
Mounting of device support cover
The cover of the device support is simply
locked onto the base. The reducing elements
may need to be removed, depending on
the trunking height.
Installation of mounting box cover
The cover of the device support is placed on
the base and fastened using the socket cover.
06 LFS_Katalog_2010_Neuer_Stand / en / 25/02/2010 (LLExport_00995)
24 OBO LFS