LFS Cable routing systems - OBO Bettermann

Mounting aid for Modul 45 sockets
Device connection
The electrical connection is made using integrated
screwless terminals, designed for rigid
cables with a cross-section of 1.5–2.5 mm².
Flexible wire ends must be equipped with a
plug connector.
Use of strain relief
The strain relief is attached to the front side on
the fastening grooves. The strain on cables of
a diameter of up to 10 mm is relieved correctly.
Using the encoding pin
Attach the encoding pin to the connector and
stick it fast. It is not possible to insert a connector
into an encoded socket without the encoded
pin being mounted.
06 LFS_Katalog_2010_Neuer_Stand / en / 25/02/2010 (LLExport_00995)
Planning aid, device installation
LFS
OBO
67