B-SX600 Series Supply Specification - Finn-ID

More documents

Recommendations

Info

2.4 EFFECTIVE PRINT AREA OF PAPER B-SX600 Supply Specification 2.4.1 Relationship between Print Head Effective Print Width and Paper Width Nonprinting area 8 mm 104 (Head effective print width) 8 mm Non-printing area 120 mm (Max. paper width) (110 mm in the case of thermal transfer printing) 2.4.2 Effective Print Area of Tags and Labels (1) Die-cut label B A A B Label width Backing paper width A = 2 mm or over B = 1.5 mm (if a label length is 100 mm or less) B = 2.5 mm (if a label length is more than 100 mm) - 6 -
(2) Notched media B-SX600 Supply Specification B A A B Media width A = 2 mm or over B = 1.5 mm (if a notch pitch is 100 mm or less) B = 2.5 mm (if a notch pitch is more than 100 mm) 2.4.3 Print Position Accuracy (Top edge of label) • The standard value is determined on the following print conditions: Operating temperature: 25ºC Supply: First label • Be sure to snugly fit the media guides to the paper side edges. Failure to do so reduces the accuracy of the horizontal position. (1) Horizontal (Meandering) Horizontal misalignment due to repetition: A = ±0.3 mm The standard value of the horizontal direction is defined based on the center position of the top edge. Paper feed direction A – direction + direction - 7 -
Page 1 and 2: TOSHIBA Bar Code Printer B-SX600 Se
Page 3 and 4: 1. SCOPE B-SX600 Supply Specificati
Page 5 and 6: 2.3 COMBINATION OF MEDIA AND SENSOR
Page 7: B-SX600 Supply Specification 2.3.3
Page 11 and 12: (2) Use a label of which silicon la
Page 13 and 14: B-SX600 Supply Specification Fig. 2
Page 15 and 16: 4. PRINT CONDITIONS B-SX600 Supply
Page 17: B-SX600 Supply Specification Ribbon

B-SX600 Series Supply Specification - Finn-ID

Create successful ePaper yourself

Delete template?

Save as template?