HP ProCurve Networking Datasheets - Moonblink

HP ProCurve Switch 2610 Series
Specifications
HP ProCurve Switch 2610-48-PWR (J9089A)
HP ProCurve Switch 2610-24/12PWR (J9086A)
Ports 48 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u
Type 100Base-TX)
Media type: Auto-MDIX
Duplex: half or full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
Physical characteristics
Dimensions (D x W x H)
Weight (fully loaded)
Memory and processor
Processor
Mounting
Performance
Latency
100 MB:
1000 MB:
Throughput
Routing/Switching capacity
MAC address table size
Environment
Operating temperature
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage relative humidity
Altitude
Acoustic
Electrical characteristics
Maximum heat dissipation
Voltage
Current
Maximum power rating
Frequency
Notes
13.5 x 17.4 x 1.73 in. (34.29 x 44.2 x 4.39 cm) (1U height)
16.7 lb. (7.58 kg)
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 2 MB
24 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u
Type 100Base-TX)
Media type: Auto-MDIX
Duplex: half or full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
9.3 x 17.4 x 1.73 in. (23.62 x 44.2 x 4.39 cm) (1U height)
7.5 lb. (3.4 kg)
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 1 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only