Nepal Telecom

Nepal Telecom
Nepal Doorsanchar Company Limited
Section VIII: Technical Specifications
Clause
No.
Particulars of NT’s requirements
1 General
1.1 This specification covers Recharge (Scratch) Cards for GSM (Mobile)
Pre-Paid Service.
2 Scope
This part of the specification gives the technical requirements of the
• Two in One Recharge Card be supplied under this tender.
The Bidder shall
state as : Fully
Compliant/ Partially
Compliant /Non
Compliant
3 General Requirements
3.1 Paper
3.1.1 The recharge card shall be made of 300 gsm Maxi Gloss (High opacity
paper to avoid intense light penetrates)Paper for Two in One Recharge
Card.
(*)3.2 Sizing
3.2.1 Two in One Recharge Card for GSM Pre-Paid Service of Different
Denominations
The dimension of recharge card shall be of 86 mm X 54 mm for two
PINs and should be separated by perforated separation. The size of
individual card for one PIN is 54 mm X 43 mm
86 mm
Recharge Card
A
(PIN)
Recharge Card
B
(PIN)
54 mm
3.3 Shape
43 mm 43 mm
(300 gsm Maxi Gloss Paper Two in One Recharge Card)
3.3.1 The card is temporally separated by sewing line or holed line.
( perforated separation)
3.4 Printing
3.4.1 4 color offset printing on front side and single color black printing on
back side of the card. User’s instructions (in English and Nepali) as
provided by Nepal Telecom shall be printed on each side of the card.
3.4.2 UV-varnish on both sides
________________________________________________________________________________________________________
Tender No.: NDCL/MSD-04/066-67 for Supply and Delivery of Recharge Cards for GSM Pre-Paid Service
Page 34 of 40