Quattro 2 User's Guide, issue 2. 6666533 - Waters

Quattro II
User's Guide
Carefully slide the RF lens assembly along the guide rods until the inner end is
felt to engage in the analyser entrance orifice.
RF Lens
Assembly
API Adaptor
Flange
Release the quick release clamp and remove the blanking flange. Retain the O
ring and clamp.
Insert the API source housing into the analyser housing and secure with the two
black thumb nuts.
Using the O ring and quick release clamp, connect the pumping tube to the port
on the side of the source.
Check that the manual vent valve is closed.
Routine Procedures
Page 46