Advantech HPC-1420-ISSE User Guide
Advantech HPC-1420-ISSE User Guide
Advantech HPC-1420-ISSE User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2. Push the back side of the top<br />
cover panel backward until it is<br />
half inch away from the front<br />
upper cover panel.<br />
3. Remove the back top cover panel.<br />
1/2 inch distance<br />
2.1.3 Install the rear cover<br />
Match the upper cover panel to the<br />
grooves on the left and right sides.<br />
1. Locate the grooves (see the<br />
figure). Push the top cover panel<br />
toward the front panel.<br />
2. Match the clips of the top cover<br />
panel with the grooves (see the<br />
figure), and then clinch. Leave<br />
a half inch distence between<br />
the front edge of the top cover<br />
panel and the real panel.<br />
firmly clinched<br />
match the clips and the grooves<br />
3. Fasten the two screws as shown below.<br />
screws<br />
2-<br />
Chapter 2: Hardware Setup
Change language