Advantech HPC-1420-ISSE User Guide
Advantech HPC-1420-ISSE User Guide
Advantech HPC-1420-ISSE User Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3. Remove the fan from the fan<br />
assembly as shown.<br />
4. Uninstall the fan following the<br />
instructions in the pervious<br />
section.<br />
5. Pull the dummy case to the<br />
d i r e c t i o n o f t h e a r r o w t o<br />
disengage its pegs from the<br />
device fan.<br />
Retaining tab<br />
6. Move the half of the cover box<br />
upward, then remove the cables<br />
(as arrow show).<br />
7. Replace the device fan.<br />
To change the fan and reinstall the dummy case:<br />
1. Put the fan power cables into the cable groove on dummy case as<br />
shown.<br />
2. Move the half part of the dummy case to the back of the fan as shown.<br />
3. Match the retaining tab with its notch and lock it.<br />
4. Put the device fan with the dummy case into the fan cage.<br />
Retaining tab<br />
2-26<br />
Chapter 2: Hardware Setup