Services on the QFX Series - Juniper.net

Chapter 5: Configuration Statements for Port Mirroring
name—Name of the analyzer. The name can include as many as 125 characters; must
begin with a letter; and can include uppercase letters, lowercase letters, numbers,
dashes, and underscores. No other special characters are allowed.
The remaining statements are explained separately.
Required Privilege
Level
Related
Documentation
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
• Understanding Port Mirroring on page 3
• Configuring Port Mirroring on page 23
• Example: Configuring Port Mirroring for Local Analysis on page 13
egress
Syntax egress {
interface (all | interface-name);
}
Hierarchy Level
For platforms without ELS:
[edit ethernet-switching-options analyzer name input]
For platforms with ELS:
[edit forwarding-options analyzer name input]
Release Information
Description
Statement introduced in Junos OS Release 11.2 for the QFX Series.
Specify interfaces for which egressing traffic is mirrored.
The statement is explained separately.
NOTE: If you configure Junos OS to mirror egress packets, do not configure
more than 2000 VLANs. If you do so, some of the mirrored packets might
contain incorrect VLAN IDs.
Required Privilege
Level
Related
Documentation
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
• Understanding Port Mirroring on page 3
• Configuring Port Mirroring on page 23
• Example: Configuring Port Mirroring for Local Analysis on page 13
Copyright © 2013, Juniper Networks, Inc.
31