pdf transform.book - Kodak

Chapter 1. Getting Started
Menu Commands and Tools
displayed in the Printing System text field in the measurement palette.
The value in the w text field indicates the width of the widest data station
rail in the printing system.
Data Station Tools A graphical representation of each data station
included in the printing system configuration is displayed in the printing
system tool. Depending on the configuration, more than one data station
tool may be displayed. By repositioning a data station tool, you can
simultaneously change the horizontal position of all the printhead tools
that are configured for the data station. When you select a data station
tool, the tool is displayed as a darker shade of gray and the data station
type is displayed in the Data Station text field in the measurement
palette. The value in the w text field indicates the width of the data station
rail.
Printhead Tools A graphical representation of the printheads
configured for each data station are displayed in the data station tool. The
printhead tools are displayed on horizontal, blue lines that represent the
rails upon which the actual printheads are mounted.
Each printhead tool must be enabled or disabled, positioned, stitched,
and assigned to the correct color and resolution to reflect the attributes of
the actual printhead hardware. The order of the printhead ID numbers
and logical RIP ID numbers must match the actual printhead hardware
configuration.
When you select a printhead tool, the printhead type and resolution are
displayed in the Type text field in the measurement palette.
When a spot color is assigned to a printhead tool, the print array for the
tool is displayed in the selected spot color. When a process color is
assigned to a printhead tool, the print array appears multi-colored to
represent process color.
User’s Guide 1 - 11