pdf transform.book - Kodak

Chapter 2. Creating the Job Layout
Modifying Printhead Tools
4. Double-click one end of the printhead tool to be moved. The end that
you click depends on how you want to stitch the printheads. For
example, if you want to stitch the left end of the moving printhead tool
to the right end of the stationary printhead tool, double-click the left
end of the moving printhead tool.
The moving printhead is repositioned so that the printhead tools are
stitched. Triangles appear in the print arrays of the printhead tools
(indicating that the tools are stitched). Notice that both printhead tools
now share the same logical RIP number.
Note:
Deselect the Move tool to avoid accidentally repositioning items on the
web template.
Using a Menu Command
Printhead tools can also be stitched using commands from the
Context menu.
1. Decide which printhead tool is to remain stationary when the tools are
stitched.
2. Verify that the stationary printhead tool is correctly positioned by clicking
it and checking the x value displayed in the measurement palette.
3. Click the printhead tool to be moved.
4. Right-click the printhead tool again to display the Context menu.
5. Select Left Stitch to stitch the left end of the selected printhead tool
to the right end of the other printhead tool. Select Right Stitch to
stitch the right end of the selected printhead tool to the left end of the
other printhead tool.
Unstitching Printheads
To unstitch printhead tools immediately after they are stitched, select Edit
→ Undo Move Printhead. To unstitch printhead tools at anytime, rightclick
one of the stitched printhead tools and select Unstitch.
Locking Printhead Tools
After the printhead tools are positioned, they should be locked into place
to prevent them from accidentally being moved. Other modifications, such
2 - 18 PDF Transform Software