pdf transform.book - Kodak

Chapter 2. Creating the Job Layout
Modifying Printhead Tools
You can position one printhead tool at a time, all of the printhead tools
configured for a selected data station, or all of the printhead tools
configured for the printing system.
Use one of the following methods to select the printhead tool(s) being
positioned:
Note:
Stitched printheads are positioned simultaneously.
• To position one printhead tool, click the appropriate printhead tool.
• To position all of the printhead tools for a selected data station, click
the data station tool.
• To position all of the printhead tools for the printing system, click the
printing system tool.
Printhead tools are positioned using the measurement palette, the tool
bar, or a menu command.
Using the Measurement Palette
Use the following steps to position a printhead tool from the
measurement palette:
1. Click the printhead tool being positioned.
2. Change the value in the x text box.
3. Select ENTER.
Using the Tool Bar
You can use a tool bar tool to manually position printhead tools.
1. Click the Move tool from the View tool bar.
Note:
2. Click the printhead tool being positioned.
Notice that the printhead tool does not move when you attempt to drag it;
this safety feature prevents items from accidentally being moved.
3. Click the printhead tool again.
4. While holding down the left mouse button, drag the printhead tool to
the new position.
2 - 16 PDF Transform Software