Cisco IOS Software Configuration Guide for Cisco Aironet Access ...

Contents
Configuring Other Access Points to Use the Local Authenticator 9-6
Configuring EAP-FAST Settings 9-7
Configuring PAC Settings 9-7
Configuring an Authority ID 9-8
Configuring Server Keys 9-8
Possible PAC Failures Caused by Access Point Clock 9-8
Limiting the Local Authenticator to One Authentication Type 9-9
Unblocking Locked Usernames 9-9
Viewing Local Authenticator Statistics 9-9
Using Debug Messages 9-10
CHAPTER 10 Configuring Cipher Suites and WEP 10-1
Understanding Cipher Suites and WEP 10-2
Configuring Cipher Suites and WEP 10-3
Creating WEP Keys 10-3
WEP Key Restrictions 10-4
Example WEP Key Setup 10-5
Enabling Cipher Suites and WEP 10-6
Matching Cipher Suites with WPA and CCKM 10-7
Enabling and Disabling Broadcast Key Rotation 10-7
CHAPTER 11 Configuring Authentication Types 11-1
Understanding Authentication Types 11-2
Open Authentication to the Access Point 11-2
Shared Key Authentication to the Access Point 11-3
EAP Authentication to the Network 11-4
MAC Address Authentication to the Network 11-5
Combining MAC-Based, EAP, and Open Authentication 11-6
Using CCKM for Authenticated Clients 11-6
Using WPA Key Management 11-7
Software and Firmware Requirements for WPA, CCKM, CKIP, and WPA-TKIP 11-8
Configuring Authentication Types 11-10
Assigning Authentication Types to an SSID 11-10
Configuring WPA Migration Mode 11-13
Configuring Additional WPA Settings 11-14
Configuring MAC Authentication Caching 11-15
Configuring Authentication Holdoffs, Timeouts, and Intervals 11-16
Creating and Applying EAP Method Profiles for the 802.1X Supplicant 11-17
Creating an EAP Method Profile 11-18
x
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-8191-01