Cisco IOS Software Configuration Guide for Cisco Aironet Access ...

Chapter 8
Configuring Spanning Tree Protocol
Configuring STP Features
Non-Root Bridge Without VLANs
This example shows the configuration of a non-root bridge with no VLANs configured with STP
enabled:
hostname client-bridge-north
ip subnet-zero
!
bridge irb
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid tsunami
authentication open
guest-mode
!
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
rts threshold 2312
station-role non-root
no cdp enable
bridge-group 1
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1 path-cost 40
!
interface BVI1
ip address 1.4.64.24 255.255.0.0
no ip route-cache
!
bridge 1 protocol ieee
bridge 1 route ip
bridge 1 priority 10000
!
line con 0
line vty 0 4
login
line vty 5 15
login
!
end
Root Bridge with VLANs
This example shows the configuration of a root bridge with VLANs configured with STP enabled:
hostname master-bridge-hq
!
ip subnet-zero
!
ip ssh time-out 120
ip ssh authentication-retries 3
!
bridge irb
OL-8191-01
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
8-11