Cisco IOS Software Configuration Guide for Cisco Aironet Access ...

Contents
Guidelines for Using Multiple BSSIDs 7-8
Configuring Multiple BSSIDs 7-8
CLI Configuration Example 7-10
Displaying Configured BSSIDs 7-10
Assigning IP Redirection for an SSID 7-11
Guidelines for Using IP Redirection 7-12
Configuring IP Redirection 7-12
Including an SSID in an SSIDL IE 7-13
CHAPTER 8 Configuring Spanning Tree Protocol 8-1
Understanding Spanning Tree Protocol 8-2
STP Overview 8-2
350 Series Bridge Interoperability 8-3
Access Point/Bridge Protocol Data Units 8-3
Election of the Spanning-Tree Root 8-4
Spanning-Tree Timers 8-5
Creating the Spanning-Tree Topology 8-5
Spanning-Tree Interface States 8-5
Blocking State 8-7
Listening State 8-7
Learning State 8-7
Forwarding State 8-8
Disabled State 8-8
Configuring STP Features 8-8
Default STP Configuration 8-8
Configuring STP Settings 8-9
STP Configuration Examples 8-10
Root Bridge Without VLANs 8-10
Non-Root Bridge Without VLANs 8-11
Root Bridge with VLANs 8-11
Non-Root Bridge with VLANs 8-13
Displaying Spanning-Tree Status 8-14
CHAPTER 9 Configuring an Access Point as a Local Authenticator 9-1
Understanding Local Authentication 9-2
Configuring a Local Authenticator 9-2
Guidelines for Local Authenticators 9-3
Configuration Overview 9-3
Configuring the Local Authenticator Access Point 9-3
OL-8191-01
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
ix