Cisco IOS Software Configuration Guide for Cisco Aironet Access ...

Contents
Opening the CLI with Secure Shell 4-9
CHAPTER 4 Configuring the Access Point for the First Time 2-1
Before You Start 2-2
Resetting the Device to Default Settings 2-2
Resetting to Default Settings Using the MODE Button 2-2
Resetting to Default Settings Using the GUI 2-2
Resetting to Default Settings Using the CLI 2-3
Obtaining and Assigning an IP Address 2-4
Default IP Address Behavior 2-4
Connecting to the 350 Series Access Point Locally 2-5
Connecting to the 1100 Series Access Point Locally 2-5
Connecting to the 1130AG Series Access Point Locally 2-6
Connecting to the 1200 and 1230AG Series Access Points Locally 2-6
Connecting to the 1240AG Series Access Point Locally 2-7
Connecting to the 1300 Series Access Point/Bridge Locally 2-7
Assigning Basic Settings 2-8
Default Settings on the Express Setup Page 2-13
Configuring Basic Security Settings 2-14
Understanding Express Security Settings 2-15
Using VLANs 2-15
Express Security Types 2-16
Express Security Limitations 2-18
Using the Express Security Page 2-18
CLI Configuration Examples 2-19
Configuring System Power Settings for 1130AG and 1240AG Access Points 2-24
Using the IP Setup Utility 2-25
Obtaining IPSU 2-25
Using IPSU to Find the Access Point’s IP Address 2-25
Assigning an IP Address Using the CLI 2-26
Using a Telnet Session to Access the CLI 2-27
Configuring the 802.1X Supplicant 2-27
Creating a Credentials Profile 2-27
Applying the Credentials to an Interface or SSID 2-28
Applying the Credentials Profile to the Wired Port 2-29
Applying the Credentials Profile to an SSID Used For the Uplink 2-29
Creating and Applying EAP Method Profiles 2-30
OL-8191-01
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
v