optical interference filters - SPOT Imaging Solutions
optical interference filters - SPOT Imaging Solutions
optical interference filters - SPOT Imaging Solutions
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
QuantaMAX and Standard Filters<br />
for Fluorescence<br />
design of these <strong>filters</strong> also offers the benefit of an increased ability<br />
to attenuate off axis rays such as those found in instruments using<br />
high system speeds or less than optimally collimated light sources<br />
such as light emitting diodes (LED).<br />
Dichroic mirror substrates utilize UV-grade fused silica to take<br />
advantage of the high level of internal uniformity of this glass,<br />
therefore offering excellent transmitted wave-front distortion<br />
(TWD) and transmission values across the operational range of the<br />
substrate.<br />
of contrast is to minimize non-specific light from reaching the<br />
detector. A typical research grade CCD camera has a quantum<br />
efficiency range from ~350-1100 nm. By designing each filter<br />
to offer near band blocking of ≥ OD 6, and extended blocking to<br />
> OD 5, QMAX <strong>filters</strong> offer outstanding noise suppression though<br />
the entire integrated range of the detector.<br />
Figure 3<br />
Optical Density curve of XF407 set<br />
QuantaMAX - Stock <strong>filters</strong> are available for immediate shipment;<br />
25 mm round emission and excitation and 25.7 x 36 mm dichroic.<br />
Additional sizes are available upon request.<br />
Spectral Performance:<br />
Single fluorophore QuantaMAX <strong>interference</strong> <strong>filters</strong> and filter sets<br />
provide 90% minimum transmission across the pass-band, and<br />
routinely exhibit values greater. When using a sensitive detection<br />
technique such as fluorescence, a key to achieving high levels<br />
Optical Density<br />
Wavelength<br />
vivid and basic - Standard <strong>interference</strong> Filters<br />
Vivid and Basic - Standard <strong>interference</strong> <strong>filters</strong> and filter sets may<br />
be comprised of our speedy small volume manufacturing process<br />
or large component inventory. They are not immediately available<br />
off-the-shelf but are available to ship in 5 business days (expedited<br />
deliveries are available upon request), and are customized to your<br />
physical and spectral requirements. Applications involving novel<br />
fluorophores or multiplexing systems where customized bandwidths<br />
are a must are examples of where a product from the standard filter<br />
program can be offered to optimize the system performance. The<br />
strategy of small lot builds and the incorporation of off-the-shelf<br />
components provides for <strong>filters</strong> of nearly any characteristic to be<br />
produced in a fast and economical fashion.<br />
Vivid Filters:<br />
The Vivid product line utilizes a proprietary method of monitoring<br />
and controlling the coating process. This technology yields <strong>filters</strong><br />
with exceptionally high signal to noise and steep transistion slopes,<br />
making them suitable for demanding applications. Vivid <strong>filters</strong> offer<br />
precise and accurate location of cut on and cut off edges with<br />
tolerances of +/- 0.01 – +/- 0.05 % of the 50% wavelength edge.<br />
Basic Filters:<br />
The Basic <strong>filters</strong> offer excellent performance at a reasonable<br />
cost. These <strong>filters</strong> and filter sets are optimized for the specified<br />
application and utilize multi-cavity, Fabry-Perot designs to achieve<br />
a rectangular bandpass shape with very steep edges and deep<br />
blocking up to OD6 outside the passband.<br />
Flexible and efficient manufacturing:<br />
Vivid and Basic - Standard <strong>interference</strong> <strong>filters</strong> are assembled from<br />
our component inventory library of thousands of filter and blockers,<br />
along with our speedy turn-around manufacturing capabilities, to<br />
provide solutions for unique applications. Some examples of these<br />
applications are narrow band Quantum dot specific <strong>filters</strong>, ratio<br />
imaging <strong>filters</strong>, UV activated photo-switchable proteins, along with<br />
many of the less commonly used fluorophores such as Indocyanine<br />
Green. These products will meet the requirements for both industry<br />
and research where a stock catalog part may not provide the ideal<br />
characteristics for the application and without the added cost of a<br />
custom manufactured filter and associated lead times.<br />
Specifications:<br />
Vivid and Basic - Standard <strong>filters</strong> are designed to functional<br />
specifications of the best <strong>optical</strong> performance at a reasonable<br />
price and delivery. Typically, standard band-pass excitation <strong>filters</strong><br />
reach minimum 75 % transmission. Standard <strong>filters</strong> that do not<br />
require extended blocking can exhibit up to 80-90 % transmission.<br />
Standard long and short-pass <strong>filters</strong> will average > 90 % transmission<br />
over the specified operating spectral range. All imaging <strong>filters</strong> are<br />
polished to ≥ 15 arc seconds parallelism and anti-reflection coating<br />
applied to minimize deviation and reflection. Dichroic mirrors are<br />
built on the same high quality substrate material as those in the<br />
stock program for imaging qualities.<br />
70<br />
For current product listings, specifications, and pricing:<br />
www.omega<strong>filters</strong>.com • sales@omega<strong>filters</strong>.com<br />
1.866.488.1064 (toll free within USA only) • +1.802.254.2690 (outside USA)