FS-1118MFP KM-1820 - kyocera

2GM
9. Hold the process unit stable and push on the
areas marked PUSH HERE on the toner
container until the container clicks into place.
Toner container
Figure 1-3-17
10. Push the lock lever back into its locked position.
Lock lever
Figure 1-3-18
11. Set the process unit into the machine by aligning
the pins on both sides of the process unit with the
guides inside the machine, and then slide the
process unit all the way back into the machine
until it stops.
Pin
Pin
Figure 1-3-19
1-3-9