FS-1118MFP KM-1820 - kyocera
FS-1118MFP KM-1820 - kyocera
FS-1118MFP KM-1820 - kyocera
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2GM<br />
Maintenance<br />
item No.<br />
U089<br />
Description<br />
Outputting a MIP-PG pattern<br />
Description<br />
Selects and outputs a MIP-PG pattern created in the machine.<br />
Purpose<br />
When performing respective image printing adjustments, used to check the machine status apart from that of<br />
the scanner with a non-scanned output MIP-PG pattern.<br />
Method<br />
1. Press the enter key. A selection item appears.<br />
2. Select the item to be output using the up/down cursor keys.<br />
Display<br />
Description<br />
Gray Scale<br />
Outputs the gray PG<br />
Mono<br />
Outputs the monochrome PG<br />
256 Outputs the 256-level PG<br />
1dot<br />
Outputs the 1dot PG<br />
3. Press the enter key to enter the selected mode.<br />
Method: Gray PG output or 256-level PG output<br />
1. Press the up/down cursor keys to select the desired item of gradation processing.<br />
Display<br />
Description<br />
Err Diffusion2<br />
2-value error diffusion method<br />
Err Diffusion4<br />
4-value error diffusion method<br />
Dither<br />
Dither matrix method<br />
2. Press the enter key.<br />
3. Press the up/down cursor keys to select whether output of γ is on or off.<br />
Display<br />
Description<br />
γ Off<br />
Output of γ off<br />
γ On<br />
Output of γ on<br />
4. Press the enter key.<br />
5. Press the system menu/counter key. The machine enters the PG pattern output mode.<br />
6. Press the start key. A MIP-PG pattern is output.<br />
7. To return to the indication for setting, press the system menu/counter key.<br />
Method: Monochrome PG output<br />
1. Change the setting using the left/right cursor keys.<br />
Description Setting range Initial setting<br />
Monochrome PG output level 0 to 255 70<br />
2. Press the enter key. The value is set.<br />
3. Press the up/down cursor keys to select the desired item of gradation processing.<br />
Display<br />
Description<br />
Err Diffusion2<br />
2-value error diffusion method<br />
Err Diffusion4<br />
4-value error diffusion method<br />
Dither<br />
Dither matrix method<br />
4. Press the enter key.<br />
5. Press the up/down cursor keys to select whether output of γ is on or off.<br />
Display<br />
Description<br />
γ Off<br />
Output of γ off<br />
γ On<br />
Output of γ on<br />
6. Press the enter key.<br />
7. Press the system menu/counter key. The machine enters the PG pattern output mode.<br />
8. Press the start key. A MIP-PG pattern is output.<br />
9. To return to the indication for setting, press the system menu/counter key.<br />
1-4-9
Change language