USER'S GUIDE - Ono
USER'S GUIDE - Ono
USER'S GUIDE - Ono
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HITRON CDE-30364 USER’S <strong>GUIDE</strong><br />
23<br />
TABLE 3: GUI Overview<br />
Primary<br />
Use this section to move from one part of the GUI to another.<br />
Navigation Bar<br />
Secondary Use this section to move from one related screen to another.<br />
Navigation Bar<br />
Main Window Use this section to read information about your CDE-30364’s<br />
configuration, and make configuration changes.<br />
1.7 RESETTING THE CDE-30364<br />
When you reset the CDE-30364 to its factory defaults, all user-configured settings are<br />
lost, and the CDE-30364 is returned to its initial configuration state.<br />
There are two ways to reset the CDE-30364:<br />
Press the RESET button on the CDE-30364, and hold it in for ten seconds or<br />
longer.<br />
Click LAN > Backup. In the screen that displays, click the Factory Reset<br />
button.<br />
The CDE-30364 turns off and on again, using its factory default settings.<br />
NOTE: Depending on your CDE-30364’s previous configuration, you may need to reconfigure<br />
your computer’s IP settings; see IP Address Setup on page 20.<br />
INTRODUCTION
Change language